Restored Thorens TD160 Mkii Turntable Black Petrol & Sme 3009 S IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!This turntable is available in 220V/ 50Hz or 110V/60Hz (for example UNITED STATES)! REVISED by ART-AND-SOUND Restored 160 MK II in black - petrol metallic with SME 3009 Series IIIWITH A FIGHTING WEIGHT OF OVER 10 KG!!!Our turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width: 45cm, depth: 36cm, height approx. 18cmThe housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with surface painting petrol metallicThe Ortofon Vinyl Master Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.The audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. The turntable:High-gloss finish in black, turntable support in transparent acrylic glass, 7 single puck made of demagnetized stainless steelHeight-adjustable spikes:Black-chrome surface. The vibrations are absorbed by the high pressure point, which is achieved by concentrating the maximum weight of the record player on a minimum point (tip of the spike). Resonances and feedback are thus effectively prevented.The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following parts are available as accessories and not included in this auction:Hood small (to put on the housing): 160Hood large (to put on the base): 180Cartridge MM system including installation:Ortofon VM Red (naked elliptical cut): 199Ortofon VM Blue (Nude fineline cut): 299Ortofon VM Silver (Nude Fritz Gyger 70 cut): 435Ortofon 2M Red (elliptical): 99Ortofon 2M Blue (elliptical, naked): 199Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 590 Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899Cartridge MC System including installation:AUDIO TECHNICA AT-OC9XML (Microlinear): 599AUDIO TECHNICA AT-OC9XSH (Shibata): 699AUDIO TECHNICA AT-OC9XSL (Special Line Contact): 799The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inneThe housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inne Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD160 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Individuelle Anfertigung! Bitte beachten Sie, die bei Ebay angegebene Bearbeitungszeit! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA)! Bei Selbstabholung 70,00 € Rabatt! REVIDIERT von ART-AND-SOUND Restaurierter THORENS TD 160 MK II in schwarz - burgundy metallic mit SME Series III MIT EINEM KAMPFGEWICHT VON ÜBER 10 KG !!! Unsere Plattenspieler werden in liebevoller Handarbeit zusammengestellt, modifiziert und montiert. Jeder von ihnen ist ein Unikat und unterscheidet sich in Modell, Farbe, Furnier-maserung. Die hochwertigen Gehäuse werden in qualifizierter Handwerksarbeit restauriert oder neu angefertigt.Elektrische Bauteile werden überpüft, beweglichen Teile geölt und Verschleißteile ausgetauscht.Einen abschließender Dauerlauftest runden die aufwendigen Arbeiten ab.Der Kunde erhält ein Gerät der Spitzenklasse. Artikelbeschreibung:Endabschaltung: NeinInnenteller: MetallLagerdorn: 7 mm Grundmaße: Breite: 45cm, Tiefe: 36cm, Höhe ca.18cm Das Gehäuse: Das Gehäuse besteht aus 25mm-MDF-Seitenteilen und einem 16 mm starken Boden gleichen Materials. Es ist sehr aufwendig mit mehreren Lagen Hochglanzlack bei entsprechenden Zwischenschliffen versiegelt und poliert. An der Rückseite befindet sich das Anschlusspanel für alle benötigten Kabelverbindungen. Faceplate: Deckplatte aus 1mm Aluminium mit Oberflächenlackierung in burgundy metallic Der Tonabnehmer Ortofon Vinyl Master Alpha:Mit der VM-Serie hat Ortofon seit langem die Referenz MM-Tonabnehmer geschaffen, die lange Produktionszeit und der charakteristische Nadelkorpus sind auf der ganzen Welt ein Begriff. Das VM Alpha ist der Einstieg in die Serie für Plattenspieler der mittleren Preislage.Die VM Reihe von Ortofon ist untereinander kompatibel. Sie können also mit einem VM Alpha starten und dann mit dem passenden Nadeleinschub die Qualität verbessern, indem Sie den nächsthörern Nadeleischub verwenden. Das Audiokabel:Markenkabel. Fertig konfektioniertes analoges Audio-Cinchkabel für die Verkabelung von Plattenspielern! Durch den besonders hochwertigen Innenleiter aus sauerstofffreiem Kupfer (OFC) sorgt dieses Qualitätskabel für eine naturgetreue Signalübertragung. Kontaktsicherheit und Korrosionsschutz ist über die 24 Karat vergoldeten Steckerkontakte garantiert. Das Kabel hat ein neutrales Klangbild mit guter Dynamik und Räumlichkeit. Der Plattenteller: Hochglanzlackierung in schwarz, Plattentellerauflage Acrylglas transparent, 7 Single-Puck aus entmagnetisierten Edelstahl Höhenverstellbare Spikes: Oberfläche schwarz-chrom. Durch den hohen Druckpunkt, der dadurch erreicht wird, dass auf einen minimalen Punkt (Spitze des Spikes) das maximale Gewicht des Plattenspielers konzentriert wird, werden die Schwingungen absorbiert. Resonanzen und Rückkopplungen werden somit effektiv verhindert. Der Antriebsriemen:Der Antriebsriemen ist neu. Er wird nach den ursprünglichen Thorens Spezifikationen (gleiches Material und gleiche Abmessungen) gefertigt. ------------------------------------------------------------------------------------------------------------------------------------------ Folgende Teile sind als Zubehör erhältlich und nicht Bestandteil dieser Auktion: Haube klein (zum Aufsetzen auf die Zarge): 150 €Haube groß (zum Aufsetzen auf den Unterbau): 160 € The following parts are available as accessories and not included in this auction:Hood small (to put on the housing): 150 €Hood large (to put on the base): 160 € Cartridge MM System including installation: Ortofon VM Red (nackter elliptischer Schliff): 199 €Ortofon VM Blue (Nude Fineline Schliff): 299 €Ortofon VM Silver (Nude Fritz Gyger 70-Schliff): 435 € Ortofon 2M Red (elliptisch) 99 €Ortofon 2M Blue (Diamantschliff): 199 €Ortofon 2M Bronze (Fineline-Diamantschliff): 360 €Ortofon 2M Black (Shibata-Diamantschliff): 590 €Ortofon 2M Black LVB 250 (wahrscheinlich der weltbeste MM-Tonabnehmer): 975 €

Restored Thorens Td 160 Mkii Turntable & Sme Series III Tracking ArmThe description of this item has been automatically translated. If you have any questions, please feel free to contact us. This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or Japan)Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay! Information:In order to ensure an optimal basic setting of the record player, the record weight is omitted. The plate weight is not part of the offer.In order to ensure an optimal basic setting of the turntable, the record weight is omitted. The plate weight is not part of the offer.RESTORED by ART-AND-SOUND 160 MKII with SME Series III tonearmOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device. Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width 45cm, depth 36cm, height 18cm The housing:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm aluminum with surface anodization in a gold lookThe Ortofon Vinyl Master Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.The audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Cartridge MM system including installation:The housing consists of 25mm MDF side panels and a 16mm thick base made of the same material. It is very complex with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact se Herstellernummer nicht zutreffend Marke Thorens - restauriert von art-and-sound EAN Nicht zutreffend Modell TD160 MKII

This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or Japan) Individuelle Anfertigung! Bitte beachten Sie, die bei Ebay angegebene Bearbeitungszeit! Individual production! Please note the processing time specified on Ebay! Information:Um eine optimale Grundeinstellung des Plattenspielers zu gewährleisten, wird auf das Plattengewicht verzichtet. Das Plattengewicht ist nicht Bestandteil des Angebotes.In order to ensure an optimal basic setting of the turntable, the record weight is omitted. The plate weight is not part of the offer. Bei Selbstabholung 70,00 € Rabatt! RESTAURIERT von ART-AND-SOUND THORENS TD 160 MKII mit SME Series III Tonarm Unsere Plattenspieler werden in liebevoller Handarbeit zusammengestellt, modifiziert und montiert. Jeder von ihnen ist ein Unikat und unterscheidet sich in Modell, Farbe, Furnier-maserung.Die hochwertigen Gehäuse werden in qualifizierter Handwerksarbeit restauriert oder neu angefertigt.Elektrische Bauteile werden überpüft, beweglichen Teile geölt und Verschleißteile ausgetauscht.Einen abschließender Dauerlauftest runden die aufwendigen Arbeiten ab.Der Kunde erhält ein Gerät der Spitzenklasse. Artikelbeschreibung:Endabschaltung: NeinInnenteller: MetallLagerdorn: 7mm Grundmaße: Breite 45cm, Tiefe 36cm, Höhe 18cm Das Gehäuse: Das Gehäuse besteht aus 25mm-MDF-Seitenteilen und einem 16 mm starken Boden gleichen Materials. Es ist sehr aufwendig mit mehreren Lagen Hochglanzlack bei entsprechenden Zwischenschliffen versiegelt und poliert. An der Rückseite befindet sich das Anschlusspanel für alle benötigten Kabelverbindungen. Faceplate: Deckplatte aus 1mm Aluminium mit Oberflächeneloxierung in Goldoptik Der Tonabnehmer Ortofon Vinyl Master Alpha:Mit der VM-Serie hat Ortofon seit langem die Referenz MM-Tonabnehmer geschaffen, die lange Produktionszeit und der charakteristische Nadelkorpus sind auf der ganzen Welt ein Begriff. Das VM Alpha ist der Einstieg in die Serie und ist ein Super Einstiegssystem für Plattenspieler der mittleren Preislage.Die VM Reihe von Ortofon ist untereinander kompatibel. Sie können also mit einem VM Alpha starten und dann mit dem passenden Nadeleinschub die Qualität verbessern, indem Sie den nächsthörern Nadeleischub verwenden.Das Audiokabel: Markenkabel. Fertig konfektioniertes analoges Audio-Cinchkabel für die Verkabelung von Plattenspielern! Durch den besonders hochwertigen Innenleiter aus sauerstofffreiem Kupfer (OFC) sorgt dieses Qualitätskabel für eine naturgetreue Signalübertragung. Kontaktsicherheit und Korrosionsschutz ist über die 24 Karat vergoldeten Steckerkontakte garantiert. Das Kabel hat ein neutrales Klangbild mit guter Dynamik und Räumlichkeit. Der Plattenteller: In fünf aufwendigen und zeitintensiven Arbeitsschritten, wird der Plattenteller auf Hochglanz poliert. Die Hochglanzpolitur verleiht Ihrem Plattenspieler ein einzigartiges Aussehen. Mit Oberflächenversiegelung durch eine spezielle Schutzlackierung, gegen wiederholtes Anlaufen und für einen langanhaltenden Glanz.Spikes aus verchromten Edelstahl: Damit der Plattenspieler von niederfrequenten Schwingungen entkoppelt wird, ist das Chassis mit höhenverstellbaren Spikes ausgestattet. Resonanzen und Rückkopplungen werden somit effektiv verhindert. Der Antriebsriemen:Der Antriebsriemen ist neu. Er wird nach den ursprünglichen Thorens Spezifikationen (gleiches Material und gleiche Abmessungen) gefertigt. Folgende Teile sind als Zubehör erhältlich und nicht Bestandteil dieser Auktion:The following parts are available as accessories and not included in this auction: Haube klein (zum Aufsetzen auf die Zarge): 160 €Haube groß (zum Aufsetzen auf den Unterbau): 170 € Cartridge MM System including installation: Ortofon VinylMaster Red: 220 € Ortofon VinylMaster Blue: 330 € Ortofon VinylMaster Silver: 470 €Ortofon 2M Red (elliptisch) 99 € Ortofon 2M Blue (Diamantschliff): 220 € Ortofon 2M Bronze (Fineline-Diamantschliff): 390 € Ortofon 2M Black (Shibata-Diamantschliff): 599 € Ortofon 2M Black LVB 250 (wahrscheinlich der weltbeste MM-Tonabnehmer): 945 €

Restored Thorens TD 160 MKII Turntable With Sme Series III oak WoodThe description of this item has been automatically translated. If you have any questions, please feel free to contact us. This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or Japan)Discount and more interesting offers from us... Take a look at... Art and Sound GermanyIndividual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!The oak frame is a natural product and always differs in grain. Figures 2 to 5 show the possible casings from which you can choose your desired oak frame.The oak frame is a natural product and always differs in grain. Figures 2 to 5 show the possible casings from which you can choose your desired oak frame.RESTORED by ART-AND-SOUND 160 Great with SME Series III tonarm and 100-year-old oak woodOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color and veneer grain.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device. Item description:Limit switch:     NoInner plate: metalBearing mandrel: 7mm Basic dimensions:            Width 45cm, depth 36cm, height 18cm The housing:The housing consists of 25mm thick side panels made of solid oak wood (oiled) and a 16mm thick base made of MDF. The connection panel for all required cable connections is located on the back. Faceplate:Cover plate made of 1mm aluminum with surface anodization in a gold lookThe Ortofon Vinyl Master Alpha cartridge:With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.The audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.The turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood small (to be placed on the frame): 160Hood big (for placing on the substructure):    180Cartridge MM system including installation: Normal 0 21 false false false DE X-NONE X-NONE Ortofon VinylMaster Red (naked elliptical cut): 190Ortofon VinylMaster Silver (nude Fritz Gyger 70 cut): 460 Ortofon 2MRed (elliptical): 99Ortofon 2M Blue (elliptical, naked): 220Ortofon 2M Bronze (Fineline): 390 Ortofon 2M Black (Shibata): 599 Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 Cartridge MC System including installation: AT-OC9XML (Microlinear): 599AT-OC9XSH (Shibata): 699AT-OC9XSL (Special Line Contact): 799 The housing consists of 25mm thick side panels made of solid oak wood (oiled) and a 16mm thick base made of MDF. The connection panel for all required cable connections is located on the back. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable Herstellernummer nicht zutreffend Marke Thorens - restauriert von art-and-sound EAN Nicht zutreffend Modell TD 160 MKII