?ª˜¨¨?ª˜¨¨¨¨˜ª¤.¸*•.¸*•¸? ? Super eBayer ??¸•*¸.•*´¸.¤ª˜¨¨¨¨˜ª?¨¨˜ª? I do provide excellent service to every buyer. Please see my feedback before you bid, and see that everyone is happy with my prices, my product .... and my service. AUCTION IS OVER ON SUNDAY AT 3PM PACIFIC, AND 6 PM EASTERN TIME HIGH END VPI TABLE AND PLATTER, AS PICTURED Hello, Lets get this gone. Tell everyone you know. If you are looking, you know someone that wants it. This was NOT my personal item. I did not use it, test it, or know any more about it than I have pictured or been told by VPI or other VPI table owners. You are bidding on what you see pictured. I purchased an entire recording studio. All high end gear. No issues with any pieces, and many in the thousands of dollars. Go look at my feedback. Some pieces I sold on a different site I prefer for this type of gear. I have had much interest in this item regarding shipping. So, if I am to ship it, it will come with certain conditions, so please read before clicking anything. First, it will come in two boxes. Yes, I have the original box. But, the platter is just too heavy. I can wrap the platter well, and place it in the original box. There is no way I can repack this and get it to you. I would prefer to have professional UPS packaging of the table. I got a quote. $85. Yes, it is too much. If you want it in one piece, and insurable, this is it. Sorry, but it is what it is. So, recap. Ill pack the platter. No charge. You will be paying to ship it in the original box, with the arm. And the turntable will be packed by UPS for $85. This would be at your cost. Then, you would pay for the shipping of the turntable as well. And both boxes would then be insured for the $999 cap per box. Thats as much as UPS will cover through ebay. Two boxes, two thousand dollars insurance. If you want to insure it for more, that would be up to you to arrange. I accept no responsibility on this sale. And, you would need to file a claim for any insurance, if damaged or lost. Not me. This is why I want UPS to pack the table. Then, there is a shot if a claim is made if it gets lost, stolen or damaged, as they packed it. I can get the platter to you fine, but insured also just in case. Total cost for shipping would be $265. I apologize but it is what it is. I am old. I do not really even want to ship it, but too many people have been asking about shipping it. The package is worth $3500-$5,000. This is worth noting, as well as the rarity and high value placed on the platter by audiophiles. You assume all risk. I you are willing to pick it up instead, Ill deduct $75 for gas from what you pay. This is as good as I can do, given the circumstances. And dont ding my shipping stars. As it is I will need to drive it 45 minutes just to drop it off, which I am happy to do. I can only do my very best, and my batting score is perfect, as you can see. 100%!!! Absolutely and positively sold as is, with no variations on the terms. Please DO NOT ASK. I am only asking $2,000 for the table and the platter. This is a steal. Ask VPI themselves. I did. I have done my very best to present this item honestly and accurately. No nonsense please. My understanding is that this is one of the most sought after and rare ever sold by VPI. Please read the following: Comes with manuals and vintage warranty registrations. I also contacted Jim at VPI, and here is what he told me. Its definitely an Aries 1 model, circa approximately 1994-1995. The arm is indeed a 10-inch (you only measure the armtube) JMW metal unipivot arm. A very solid, substantial table in its day, and lots of them still running from ~30 years ago. And, I received this from a fellow trader kind enough to share his knowledge. One thing VPI didnt tell you about your particular Aries 1 is that in place of the stock platter that came with the table, yours has the platter from the VPI TNT 5.The Aries had a real good platter: 1.25; thick, comprised of a 7/8 thick bottom section made of aluminum (onto which was bonded a thin sheet of lead, covered in cork), with a 3/8 thick top layer of Delrin. The same platter came on the TNT 3 and 4.The TNT 5 has a great one: 1.5; thick, the bottom section 5/8 thick stainless steel (no lead sheet), with a 7/8 thick top Delrin layer. Thats the platter you have, and its the one most VPI aficionados consider the best platter VPI has ever made. Congratulations, it (and the Aries table) is a beauty! There is full inspection available to the buyer, but no returns for any reason, once it meets with your approval, if local pick-up. Must be picked up with 3 days if local pickup. I will make myself available within that timeframe. No exceptions. If shipped, I will only be able to do this within 5 days, vs my usual lightning shipping. No offers outside of ebay please. No opinions either, please. Just a nice clean sale to a pro preferably. Thanks in advance. Enjoy the music. Dance while you can, and every time you can. Please see my other GREAT items up for sale on ebay!!! On Dec-19-23 at 11:23:23 PST, seller added the following information: Please note: I was able to call ahead to UPS last night and arrange for the table to be packed immediately, first thing in the morning before they opened. I did not want anyone or anything around it. They unlocked the door for me at 8:15. It took the UPS rep a very very long time to pack this, as expected. The cost was more than quoted. It was $125. I was able to drop it down 15% using my AAA card, to $107. I do not mind absorbing this additional cost, even though it was far above what I was originally quoted by UPS. My only and sole concern it getting this to you, in two boxes, intact, safe, and just like it left here. I have posted the receipt from UPS today for the $107 I paid, just to reassure the buyer. The two boxes are ready to be shipped. Now, the question is,....to whom? LOL. Enjoy the music!!!

VPI Aries Scout turntable & JMW-9 tonearm.Legendary model from VPI that is still considered the best sounding machine in its price-range.Made in USA It is in excellent condition and looks and performs as new. Comes with extra bonus items: - Two custom record mats- Anti-vibration plates, that further improve the sound- Anti-static connection cable I have the original double-box and packaging materials, so safe shipping is guaranteed. Also included all manuals and brochures. Find this ad on the usaudiomart site (search by same description) for lower and tax-free pricing. You can check my 100% positive feedback there “Rather, this is a flat-out, unconditional, “Holy Mother of Crap, I can’t believe how good this thing is” recommendation. It’s hard to imagine another way of spending $****.** that will add this much to your system.” – Art Dudley, Stereophile Magazine Description: Two-speed, belt-driven turntable with AC synchronous motor, acrylic record platter, and Delrin reflex record clamp; aluminum-alloy unipivot tonearm, height-adjustable, with interchangeable armwands. Wow & flutter: <0.02%. Rumble: below -80dB. Speed accuracy: within 0.1%. Dustcover: none. Spindle-pivot distance: 222mm. Downforce calibration: none. Antiskating: none.Dimensions: 19 W by ca 4.5 H by 14 D (without dustcover). Weight: 37 lbs.Finish: Black semigloss enamel (turntable), textured aluminum (tonearm). The Turntable:1.25? thick premium textured vinyl covered MDF bonded to a 12 gauge steel plate.Machined 1 3/8? thick 6061 acrylic platter.Platter rotates on an oil bath bearing and fitted to shaft with a #2 Jacob’s Taper for a concentric rigidly mounted coupling.The bearing has a PEEK thrust disc and machined graphite impregnated brass bushings using a Thompson Engineering 60 Rockwell case hardened shaft.300 RPM AC synchronous motor is contained in a separate steel housing and drives the platter with smooth, quiet operation.Includes a screw down record clamp that eliminates warpsCartridge not includedTechnical SpecificationWow and Flutter: .08% WRMSSpeed Accuracy: .08%Rumble: >78 db DownFootprint: 19 ½” x 13 ¾”Overall Dimensions: 21?” x 15¾” 54lbs packing weightTechRadar: Of VPIs seven-strong range of turntables, the Scout is the New Jersey-based manufacturers most affordable offering: with a price of under £1,600, it must be the least expensive US made turntable on the market.But, what it lacks in price, the Scout makes up for in size, being easily the widest turntable in the group, although it just about fits on a standard width equipment support.Furnished with a solid plinth design with a separate freestanding motor block, the Scouts only means of keeping stand-bound resonance at bay are Sorbothane mountings above each of the conical feet. The latter are tipped with a ball, rather than a spike, that will be a lot kinder to supporting surfaces.The plinth is composed of MDF atop a steel plate, while the platter is a 34mm slab of acrylic that sits on an inverted bearing with a Teflon thrust pad and a case-hardened shaft.The motor sits in a steel box that accepts a kettle lead, but cleverly hides this junction underneath the turntable. What you do see is a switch sticking out that turns it on and off. Drive is via a round section peripheral belt and speed change is a matter of flipping the belt onto the lower pulley for 45rpmThe JMW9 tonearm is a unipivot design thats beautifully finished but a pain to set-up, thanks to the wobbly nature of the genre. It has a sharp tip that acts as the bearing point and a rather ineffectual arm clamp that does little to hold it in place.The Scout does most things better than average and its good quality finish and build combine with this to make for an attractive package. The unipivot JMW9 is easily the most impressively built tonearm in this group and, for those who like using alternative cartridges, it offers the easiest means to swap the things over if you buy a second arm wand.

?ª˜¨¨?ª˜¨¨¨¨˜ª¤.¸*•.¸*•¸? ? Super eBayer ??¸•*¸.•*´¸.¤ª˜¨¨¨¨˜ª?¨¨˜ª? I do provide excellent service to every buyer. Please see my feedback before you bid, and see that everyone is happy with my prices, my product .... and my service. Good Day! I must apologize for changing this auction to local pickup only. I am doing this primarily due to one jerk. So, I am NOT shipping this. Id rather sell it really cheap to someone nice thats local, and they can see it for themselves, and not play games like swapping parts. I just dropped the price to a honey, lets go for a drive price. This was NOT my personal item. I did not use it, test it, or know any more about it than I have pictured or told by VPI or other VPI table owners. You are bidding on what you see pictured/ I wish for the buyer to see for himself that received what is pictured, and the condition it is in, is as described. I cannot offer any more information than that. All buyers please bid accordingly, if interested. I have done my very best to present this item honestly and accurately. This IS for local pick-up only in Locust Grove, VA 22508. Next, no nonsense please. Im too old. Getting older is problem enough for me. My understanding is that this is one of the most sought after and rare ever sold by VPI. Please read the following: I bought out an entire recording studio, lock stock and barrel for a tidy sum. Among the items was this table. Comes with manuals and vintage warranty registrations. I also contacted Jim at VPI, and here is what he told me. Its definitely an Aries 1 model, circa approximately 1994-1995. The arm is indeed a 10-inch (you only measure the armtube) JMW metal unipivot arm. A very solid, substantial table in its day, and lots of them still running from ~30 years ago. And, I received this from a fellow trader kind enough to share his knowledge. One thing VPI didnt tell you about your particular Aries 1 is that in place of the stock platter that came with the table, yours has the platter from the VPI TNT 5.The Aries had a real good platter: 1.25; thick, comprised of a 7/8 thick bottom section made of aluminum (onto which was bonded a thin sheet of lead, covered in cork), with a 3/8 thick top layer of Delrin. The same platter came on the TNT 3 and 4.The TNT 5 has a great one: 1.5; thick, the bottom section 5/8 thick stainless steel (no lead sheet), with a 7/8 thick top Delrin layer. Thats the platter you have, and its the one most VPI aficionados consider the best platter VPI has ever made. Congratulations, it (and the Aries table) is a beauty! There is full inspection available to the buyer, but no returns for any reason, once it meets with your approval. Must be picked up with 3 days, local pickup. I will make myself available within that timeframe. No exceptions. No offers outside of ebay please. Thanks in advance. Enjoy the music. Dance while you can, and every time you can. Please see my other GREAT items up for sale on ebay!!!

?ª˜¨¨?ª˜¨¨¨¨˜ª¤.¸*•.¸*•¸? ? Super eBayer ??¸•*¸.•*´¸.¤ª˜¨¨¨¨˜ª?¨¨˜ª? I do provide excellent service to every buyer. Please see my feedback before you bid, and see that everyone is happy with my prices, my product .... and my service. Good Day Thanks for looking. In that this item is as costly as it is, I must lay down some ground rules. This is for local pick-up only in Locust Grove, VA 22508. No, I will not and cannot ship it, at least at this point. Next, no nonsense please. Im too old. Dont need it. Getting old is problem enough for me. My understanding is that this is one of the most sought after and rare ever sold by VPI. It is worth the drive. I have many offers if I will ship, and even more than I am asking. I cannot risk it. Please read the following: I bought out an entire recording studio, lock stock and barrel for a tidy sum. Among the items was this table. Comes with manuals and vintage warranty registrations. I also contacted Jim at VPI, and here is what he told me. Its definitely an Aries 1 model, circa approximately 1994-1995. The arm is indeed a 10-inch (you only measure the armtube) JMW metal unipivot arm. A very solid, substantial table in its day, and lots of them still running from ~30 years ago. And, I received this from a fellow trader kind enough to share his knowledge. One thing VPI didnt tell you about your particular Aries 1 is that in place of the stock platter that came with the table, yours has the platter from the VPI TNT 5.The Aries had a real good platter: 1.25; thick, comprised of a 7/8 thick bottom section made of aluminum (onto which was bonded a thin sheet of lead, covered in cork), with a 3/8 thick top layer of Delrin. The same platter came on the TNT 3 and 4.The TNT 5 has a great one: 1.5; thick, the bottom section 5/8 thick stainless steel (no lead sheet), with a 7/8 thick top Delrin layer. Thats the platter you have, and its the one most VPI aficionados consider the best platter VPI has ever made. Congratulations, it (and the Aries table) is a beauty! There is full inspection available to the buyer, but no returns for any reason, once it meets with your approval. Must be picked up with 3 days. I will make myself available for your inspection within that timeframe. No exceptions. No offers outside of ebay please. Thanks in advance. Enjoy the music. Dance while you can, and every time you can. Please see my other GREAT items up for sale on ebay!!!

Follow us| Sign up for our newsletter VPI Aries 3D Limited Edition Audiophile Quality Belt Drive Turntable w Orig Box For over 20 years High End Audio Auctions has been selling the finest HiFi online, but did you know that we BUY your HiFi equipment as well? Contact our sister company STEREOBUYERS for a fair quote today! All items included are pictured. Items are tested fully to ensure all functions work as expected - any defects and additional service done to the item are noted below. Items are not restored or reconditioned, unless specified. All items we sell come with a 30-day warranty - your satisfaction is guaranteed. Original shipping on returns will be refunded at the sellers discretion. Local Pickup in NYC Available VPI Aries 3D Limited Edition - #17 of 30 Details & Testing Notes Cosmetic Condition:8/10: Very Good - flawless front face, other minor imperfectionsCosmetic Notes:Faint marks and scratches on top of plinth. Turntable is in great overall condition. Please see all high resolution photographs below.Functional Notes:Functions as intended and sounds excellent.Voltage:120V 60HzSerial #:743Original Box:YesManual:Yes + Certificate of AuthenticityPower Cord:YesShipping Method:FedEx Ground (Domestic) / USPS Priority, Ebay Standard Delivery (International) NOTE: Flat rates in the Ebay Shipping Calculator are placeholder estimates. Please contact us for rates specific to your state or country.Shipping Weight (lbs):45 (27x23x16) x 2 Boxes High-End Audio Auctions has been THE trusted source for high-end, classic and vintage audio components on eBay since 2000! Our unique products, unparalleled service and bombproof packaging keeps our customers coming back again and again. We are experts at selling and shipping worldwide, with items ranging from $5 to $50,000. We look forward to earning your repeat business! By placing a bid on any of our listings, you agree to our terms & conditions Click here to learn more Home| About Us| Store Policies| FAQs| Feedback| Contact Us| Custom Tuned Cables _gsrx_vers_1516 (GS 9.3 (1516))

?ª˜¨¨?ª˜¨¨¨¨˜ª¤.¸*•.¸*•¸? ? Super eBayer ??¸•*¸.•*´¸.¤ª˜¨¨¨¨˜ª?¨¨˜ª? I do provide excellent service to every buyer. Please see my feedback before you bid, and see that everyone is happy with my prices, my product .... and my service. Good Day Thanks for looking. In that this item is as costly as it is, I must lay down some ground rules. This is for local pick-up only in Locust Grove, VA 22508. No, I will not and cannot ship it, at least at this point. Next, no nonsense please. Im too old. Dont need it. Getting old is problem enough for me. This is a cash upon your absolute satisfaction sale and do not pay me until you are gloriously happy, pulling out of our driveway. Please read the following: I bought out an entire recording studio, lock stock and barrel for a tidy sum. Among the items was this table. Comes with manuals and vintage warranty registrations. I listed it previously incorrectly, so I opened up the box to take appropriate pictures. I also contacted Jim at VPI, and here is what he told me. Its definitely an Aries 1 model, circa approximately 1994-1995. The arm is indeed a 10-inch (you only measure the armtube) JMW metal unipivot arm. A very solid, substantial table in its day, and lots of them still running from ~30 years ago. And, I received this from a fellow trader kind enough to share his knowledge. One thing VPI didnt tell you about your particular Aries 1 is that in place of the stock platter that came with the table, yours has the platter from the VPI TNT 5.The Aries had a real good platter: 1.25; thick, comprised of a 7/8 thick bottom section made of aluminum (onto which was bonded a thin sheet of lead, covered in cork), with a 3/8 thick top layer of Delrin. The same platter came on the TNT 3 and 4.The TNT 5 has a great one: 1.5; thick, the bottom section 5/8 thick stainless steel (no lead sheet), with a 7/8 thick top Delrin layer. Thats the platter you have, and its the one most VPI aficionados consider the best platter VPI has ever made. Congratulations, it (and the Aries table) is a beauty! There is full inspection available to the buyer, but no returns for any reason, once it meets with your approval. Buyer expected to pay local sales tax as well, so please come prepared, and do not say that this is all you brought. Must be picked up with 3 days. Thanks in advance. Enjoy the music. Dance while you can, and every time you can. Please see my other GREAT items up for sale on ebay!!!

?ª˜¨¨?ª˜¨¨¨¨˜ª¤.¸*•.¸*•¸? ? Super eBayer ??¸•*¸.•*´¸.¤ª˜¨¨¨¨˜ª?¨¨˜ª? I do provide excellent service to every buyer. Please see my feedback before you bid, and see that everyone is happy with my prices, my product .... and my service. Good Day Thanks for looking. In that this item is as costly as it is, I must lay down some ground rules. This is for local pick-up only in Locust Grove, VA 22508. No, I will not and cannot ship it, at least at this point. Next, no nonsense please. Im too old. Dont need it. Getting old is problem enough for me. This is a cash upon your absolute satisfaction sale and do not pay me until you are gloriously happy, pulling out of our driveway. Please read the following: I bought out an entire recording studio, lock stock and barrel for a tidy sum. Among the items was this table. Comes with manuals and vintage warranty registrations. I listed it previously incorrectly, so I opened up the box to take appropriate pictures. I also contacted Jim at VPI, and here is what he told me. Its definitely an Aries 1 model, circa approximately 1994-1995. The arm is indeed a 10-inch (you only measure the armtube) JMW metal unipivot arm. A very solid, substantial table in its day, and lots of them still running from ~30 years ago. And, I received this from a fellow trader kind enough to share his knowledge. One thing VPI didnt tell you about your particular Aries 1 is that in place of the stock platter that came with the table, yours has the platter from the VPI TNT 5.The Aries had a real good platter: 1.25; thick, comprised of a 7/8 thick bottom section made of aluminum (onto which was bonded a thin sheet of lead, covered in cork), with a 3/8 thick top layer of Delrin. The same platter came on the TNT 3 and 4.The TNT 5 has a great one: 1.5; thick, the bottom section 5/8 thick stainless steel (no lead sheet), with a 7/8 thick top Delrin layer. Thats the platter you have, and its the one most VPI aficionados consider the best platter VPI has ever made. Congratulations, it (and the Aries table) is a beauty! There is full inspection available to the buyer, but no returns for any reason, once it meets with your approval. Buyer expected to pay local sales tax as well, so please come prepared, and do not say that this is all you brought. Must be picked up with 3 days. Thanks in advance. Enjoy the music. Dance while you can, and every time you can. Please see my other GREAT items up for sale on ebay!!!

?ª˜¨¨?ª˜¨¨¨¨˜ª¤.¸*•.¸*•¸? ? Super eBayer ??¸•*¸.•*´¸.¤ª˜¨¨¨¨˜ª?¨¨˜ª? I do provide excellent service to every buyer. Please see my feedback before you bid, and see that everyone is happy with my prices, my product .... and my service. Good Day Thanks for looking. In that this item is as costly as it is, I must lay down some ground rules. This is for local pick-up only in Locust Grove, VA 22508. No, I will not and cannot ship it, at least at this point. Next, no nonsense please. Im too old. Dont need it. Getting old is problem enough for me. This is a cash upon your absolute satisfaction sale and do not pay me until you are gloriously happy, pulling out of our driveway. Please read the following: I bought out an entire recording studio, lock stock and barrel for a tidy sum. Among the items was this table. Comes with manuals and vintage warranty registrations. I listed it previously incorrectly, so I opened up the box to take appropriate pictures. I also contacted Jim at VPI, and here is what he told me. Its definitely an Aries 1 model, circa approximately 1994-1995. The arm is indeed a 10-inch (you only measure the armtube) JMW metal unipivot arm. A very solid, substantial table in its day, and lots of them still running from ~30 years ago. And, I received this from a fellow trader kind enough to share his knowledge. One thing VPI didnt tell you about your particular Aries 1 is that in place of the stock platter that came with the table, yours has the platter from the VPI TNT 5.The Aries had a real good platter: 1.25; thick, comprised of a 7/8 thick bottom section made of aluminum (onto which was bonded a thin sheet of lead, covered in cork), with a 3/8 thick top layer of Delrin. The same platter came on the TNT 3 and 4.The TNT 5 has a great one: 1.5; thick, the bottom section 5/8 thick stainless steel (no lead sheet), with a 7/8 thick top Delrin layer. Thats the platter you have, and its the one most VPI aficionados consider the best platter VPI has ever made. Congratulations, it (and the Aries table) is a beauty! There is full inspection available to the buyer, but no returns for any reason, once it meets with your approval. Buyer expected to pay local sales tax as well, so please come prepared, and do not say that this is all you brought. Must be picked up with 3 days. Thanks in advance. Enjoy the music. Dance while you can, and every time you can. Please see my other GREAT items up for sale on ebay!!!

?ª˜¨¨?ª˜¨¨¨¨˜ª¤.¸*•.¸*•¸? ? Super eBayer ??¸•*¸.•*´¸.¤ª˜¨¨¨¨˜ª?¨¨˜ª? I do provide excellent service to every buyer. Please see my feedback before you bid, and see that everyone is happy with my prices, my product .... and my service. Good Day Thanks for looking. In that this item is as costly as it is, I must lay down some ground rules. This is for local pick-up only in Locust Grove, VA 22508. No, I will not and cannot ship it, at least at this point. Next, no nonsense please. Im too old. Dont need it. Getting old is problem enough for me. This is a cash upon your absolute satisfaction sale and do not pay me until you are gloriously happy, pulling out of our driveway. Please read the following: I bought out an entire recording studio, lock stock and barrel for a tidy sum. Among the items was this table. Comes with manuals and vintage warranty registrations. I listed it previously incorrectly, so I opened up the box to take appropriate pictures. I also contacted Jim at VPI, and here is what he told me. Its definitely an Aries 1 model, circa approximately 1994-1995. The arm is indeed a 10-inch (you only measure the armtube) JMW metal unipivot arm. A very solid, substantial table in its day, and lots of them still running from ~30 years ago. And, I received this from a fellow trader kind enough to share his knowledge. One thing VPI didnt tell you about your particular Aries 1 is that in place of the stock platter that came with the table, yours has the platter from the VPI TNT 5.The Aries had a real good platter: 1.25; thick, comprised of a 7/8 thick bottom section made of aluminum (onto which was bonded a thin sheet of lead, covered in cork), with a 3/8 thick top layer of Delrin. The same platter came on the TNT 3 and 4.The TNT 5 has a great one: 1.5; thick, the bottom section 5/8 thick stainless steel (no lead sheet), with a 7/8 thick top Delrin layer. Thats the platter you have, and its the one most VPI aficionados consider the best platter VPI has ever made. Congratulations, it (and the Aries table) is a beauty! There is full inspection available to the buyer, but no returns for any reason, once it meets with your approval. Buyer expected to pay local sales tax as well, so please come prepared, and do not say that this is all you brought. Must be picked up with 3 days. Thanks in advance. Enjoy the music. Dance while you can, and every time you can. Please see my other GREAT items up for sale on ebay!!!

?ª˜¨¨?ª˜¨¨¨¨˜ª¤.¸*•.¸*•¸? ? Super eBayer ??¸•*¸.•*´¸.¤ª˜¨¨¨¨˜ª?¨¨˜ª? I do provide excellent service to every buyer. Please see my feedback before you bid, and see that everyone is happy with my prices, my product .... and my service. Good Day Thanks for looking. In that this item is as costly as it is, I must lay down some ground rules. This is for local pick-up only in Locust Grove, VA 22508. No, I will not and cannot ship it, at least at this point. Next, no nonsense please. Im too old. Dont need it. Getting old is problem enough for me. This is a cash upon your absolute satisfaction sale and do not pay me until you are gloriously happy, pulling out of our driveway. Please read the following: I bought out an entire recording studio, lock stock and barrel for a tidy sum. Among the items was this table. Comes with manuals and vintage warranty registrations. I listed it previously incorrectly, so I opened up the box to take appropriate pictures. I also contacted Jim at VPI, and here is what he told me. Its definitely an Aries 1 model, circa approximately 1994-1995. The arm is indeed a 10-inch (you only measure the armtube) JMW metal unipivot arm. A very solid, substantial table in its day, and lots of them still running from ~30 years ago. There is full inspection available to the buyer, but no returns for any reason, once it meets with your approval. Buyer expected to pay local sales tax as well, so please come prepared, and do not say that this is all you brought. Must be picked up with 3 days. Thanks in advance. Enjoy the music. Dance while you can, and every time you can. Please see my other GREAT items up for sale on ebay!!!

?ª˜¨¨?ª˜¨¨¨¨˜ª¤.¸*•.¸*•¸? ? Super eBayer ??¸•*¸.•*´¸.¤ª˜¨¨¨¨˜ª?¨¨˜ª? I do provide excellent service to every buyer. Please see my feedback before you bid, and see that everyone is happy with my prices, my product .... and my service. Good Day Thanks for looking. In that this item is as costly as it is, I must lay down some ground rules. This is for local pick-up only in Locust Grove, VA 22508. No, I will not and cannot ship it, at least at this point. Next, no nonsense please. Im too old. Dont need it. Getting old is problem enough for me. This is a cash upon your absolute satisfaction sale and do not pay me until you are gloriously happy, pulling out of our driveway. Please read the following: I bought out an entire recording studio, lock stock and barrel for a tidy sum. Among the items was this table. Comes with manuals and vintage warranty registrations. I listed it previously incorrectly, so I opened up the box to take appropriate pictures. I also contacted Jim at VPI, and here is what he told me. Its definitely an Aries 1 model, circa approximately 1994-1995. The arm is indeed a 10-inch (you only measure the armtube) JMW metal unipivot arm. A very solid, substantial table in its day, and lots of them still running from ~30 years ago. There is full inspection available to the buyer, but no returns for any reason, once it meets with your approval. Buyer expected to pay local sales tax as well, so please come prepared, and do not say that this is all you brought. Must be picked up with 3 days. Thanks in advance. Enjoy the music. Dance while you can, and every time you can. Please see my other GREAT items up for sale on ebay!!!

?ª˜¨¨?ª˜¨¨¨¨˜ª¤.¸*•.¸*•¸? ? Super eBayer ??¸•*¸.•*´¸.¤ª˜¨¨¨¨˜ª?¨¨˜ª? I do provide excellent service to every buyer. Please see my feedback before you bid, and see that everyone is happy with my prices, my product .... and my service. Good Day, and thanks for looking. In that this item is as costly as it is, I must lay down some ground rules first. This is for local pick-up only in Locust Grove, VA 22508. No, I will not and cannot ship it Next, no nonsense please. Too old. Dont need it. Getting old is problem enough for me. This is a cash upon your absolute satisfaction sale and do not pay me until you are gloriously happy, pulling out of our driveway. Please read the following: I bought out an entire recording studio, lock stock and barrel for a tidy sum. Among the items was this table. It appears brand new, and still wrapped. The manuals appear new, with warranty registration, and sealed. In that it is in this condition, I honestly did not wish to open it, and then, its an open box. Also, I did put open box in the description as it is open, but appears brand new and pristine. There is full inspection available to the buyer, but no returns for any reason, once it meets with your approval. Buyer expected to pay local sales tax as well, so please come prepared, and do not say that this is all you brought. Must be picked up with 3 days. Thanks in advance. Enjoy the music. Dance while you can, and every time you can. Please see my other items up for sale on ebay. * Item will ship within 3 days of payment, and will be delivered to buyers registered Paypal physical address. Also, sorry but no zero feedback bidders, please!! * U.S.A CONTINENTAL SHIPPING (48 states only) * After you receive your item, if you feel the there is a discrepancy between the auction description and the item you received, then please contact me immediately to allow me the opportunity to resolve any problem. I aim to please!

?ª˜¨¨?ª˜¨¨¨¨˜ª¤.¸*•.¸*•¸? ? Super eBayer ??¸•*¸.•*´¸.¤ª˜¨¨¨¨˜ª?¨¨˜ª? I do provide excellent service to every buyer. Please see my feedback before you bid, and see that everyone is happy with my prices, my product .... and my service. Good Day, and thanks for looking. In that this item is as costly as it is, I must lay down some ground rules first. This is for local pick-up only in Locust Grove, VA 22508. No, I will not and cannot ship it Next, no nonsense please. Too old. Dont need it. Getting old is problem enough for me. This is a cash upon your absolute satisfaction sale and do not pay me until you are gloriously happy, pulling out of our driveway. Please read the following: I bought out an entire recording studio, lock stock and barrel for a tidy sum. Among the items was this table. It appears brand new, and still wrapped. The manuals appear new, with warranty registration, and sealed. In that it is in this condition, I honestly did not wish to open it, and then, its an open box. Also, I did put open box in the description as it is open, but appears brand new and pristine. There is full inspection available to the buyer, but no returns for any reason, once it meets with your approval. Buyer expected to pay local sales tax as well, so please come prepared, and do not say that this is all you brought. Must be picked up with 3 days. Thanks in advance. Enjoy the music. Dance while you can, and every time you can. Please see my other items up for sale on ebay. * Item will ship within 3 days of payment, and will be delivered to buyers registered Paypal physical address. Also, sorry but no zero feedback bidders, please!! * U.S.A CONTINENTAL SHIPPING (48 states only) * After you receive your item, if you feel the there is a discrepancy between the auction description and the item you received, then please contact me immediately to allow me the opportunity to resolve any problem. I aim to please!

VPI Genuine Belt For (Primes,Avengers,Classics,Aries,HW-19,Scout). Opened - Never Used Worldwide Shipping to all countries covered with eBay Global Shipping Programme only Please be advised to contact myself or eBay where appropriate to enquire about the shipping charges to the destination address for overseas purchases. PayPal / eBay Payment or Cash on Collection Shipping costs to remote areas may vary. Please contact me for total shipping costs to your area before purchase. Please see my other items for sale Thank you

VPI Aries Scout Turntable with JMW-9 Tonearm, excellent condition, boxed. This is a very well looked after turntable and a credit to the one previous owner. American VPI Industries have in excess of 40 years creating a vast array of highly regarded turntables and tonearms. Lots of info online and some eye watering figures grace their current line up. This is offered in its original box with original packing and all accessories, complete with manual.

This VPI Aries 3 turntable is a must-have for any serious vinyl collector. With its sleek black design, it fits seamlessly into any home entertainment setup. Compatible with most brands, this turntable boasts high-quality sound and precision performance. Made with top-of-the-line materials, this turntable includes isolation cones for maximum sound clarity. Whether you're a seasoned audiophile or just starting your vinyl collection, the VPI Aries 3 turntable is the perfect addition to your home. This item has minor cosmetic damage and comes with a audio quest NRG 3 (1 meter) power cable. The tone arm is in decent shape. A new cartridge is most likely needed. The stylus and cantilever are missing. Please note that this piece needs some pieces to achieve optimal functioning. The motor works well but does have cosmetic damage. The piece that holds the record to the platter has cracks around the black rubber. The circular metal piece the goes around the platter has cosmetic imperfections. This item needs to be cleaned as well. This is not a brand new or open box item. This is a used item that comes with the original box. This turntable would benefit from professional serving. Item is being sold as-is condition. Please inspect item carefully prior to purchasing. Ask questions and request more pictures. This item will ship in the original box.