?ª˜¨¨?ª˜¨¨¨¨˜ª¤.¸*•.¸*•¸? ? Super eBayer ??¸•*¸.•*´¸.¤ª˜¨¨¨¨˜ª?¨¨˜ª? I do provide excellent service to every buyer. Please see my feedback before you bid, and see that everyone is happy with my prices, my product .... and my service. Good Day Thanks for looking. In that this item is as costly as it is, I must lay down some ground rules. This is for local pick-up only in Locust Grove, VA 22508. No, I will not and cannot ship it, at least at this point. Next, no nonsense please. Im too old. Dont need it. Getting old is problem enough for me. My understanding is that this is one of the most sought after and rare ever sold by VPI. It is worth the drive. I have many offers if I will ship, and even more than I am asking. I cannot risk it. Please read the following: I bought out an entire recording studio, lock stock and barrel for a tidy sum. Among the items was this table. Comes with manuals and vintage warranty registrations. I also contacted Jim at VPI, and here is what he told me. Its definitely an Aries 1 model, circa approximately 1994-1995. The arm is indeed a 10-inch (you only measure the armtube) JMW metal unipivot arm. A very solid, substantial table in its day, and lots of them still running from ~30 years ago. And, I received this from a fellow trader kind enough to share his knowledge. One thing VPI didnt tell you about your particular Aries 1 is that in place of the stock platter that came with the table, yours has the platter from the VPI TNT 5.The Aries had a real good platter: 1.25; thick, comprised of a 7/8 thick bottom section made of aluminum (onto which was bonded a thin sheet of lead, covered in cork), with a 3/8 thick top layer of Delrin. The same platter came on the TNT 3 and 4.The TNT 5 has a great one: 1.5; thick, the bottom section 5/8 thick stainless steel (no lead sheet), with a 7/8 thick top Delrin layer. Thats the platter you have, and its the one most VPI aficionados consider the best platter VPI has ever made. Congratulations, it (and the Aries table) is a beauty! There is full inspection available to the buyer, but no returns for any reason, once it meets with your approval. Must be picked up with 3 days. I will make myself available for your inspection within that timeframe. No exceptions. No offers outside of ebay please. Thanks in advance. Enjoy the music. Dance while you can, and every time you can. Please see my other GREAT items up for sale on ebay!!!

?ª˜¨¨?ª˜¨¨¨¨˜ª¤.¸*•.¸*•¸? ? Super eBayer ??¸•*¸.•*´¸.¤ª˜¨¨¨¨˜ª?¨¨˜ª? I do provide excellent service to every buyer. Please see my feedback before you bid, and see that everyone is happy with my prices, my product .... and my service. Good Day Thanks for looking. In that this item is as costly as it is, I must lay down some ground rules. This is for local pick-up only in Locust Grove, VA 22508. No, I will not and cannot ship it, at least at this point. Next, no nonsense please. Im too old. Dont need it. Getting old is problem enough for me. This is a cash upon your absolute satisfaction sale and do not pay me until you are gloriously happy, pulling out of our driveway. Please read the following: I bought out an entire recording studio, lock stock and barrel for a tidy sum. Among the items was this table. Comes with manuals and vintage warranty registrations. I listed it previously incorrectly, so I opened up the box to take appropriate pictures. I also contacted Jim at VPI, and here is what he told me. Its definitely an Aries 1 model, circa approximately 1994-1995. The arm is indeed a 10-inch (you only measure the armtube) JMW metal unipivot arm. A very solid, substantial table in its day, and lots of them still running from ~30 years ago. And, I received this from a fellow trader kind enough to share his knowledge. One thing VPI didnt tell you about your particular Aries 1 is that in place of the stock platter that came with the table, yours has the platter from the VPI TNT 5.The Aries had a real good platter: 1.25; thick, comprised of a 7/8 thick bottom section made of aluminum (onto which was bonded a thin sheet of lead, covered in cork), with a 3/8 thick top layer of Delrin. The same platter came on the TNT 3 and 4.The TNT 5 has a great one: 1.5; thick, the bottom section 5/8 thick stainless steel (no lead sheet), with a 7/8 thick top Delrin layer. Thats the platter you have, and its the one most VPI aficionados consider the best platter VPI has ever made. Congratulations, it (and the Aries table) is a beauty! There is full inspection available to the buyer, but no returns for any reason, once it meets with your approval. Buyer expected to pay local sales tax as well, so please come prepared, and do not say that this is all you brought. Must be picked up with 3 days. Thanks in advance. Enjoy the music. Dance while you can, and every time you can. Please see my other GREAT items up for sale on ebay!!!

?ª˜¨¨?ª˜¨¨¨¨˜ª¤.¸*•.¸*•¸? ? Super eBayer ??¸•*¸.•*´¸.¤ª˜¨¨¨¨˜ª?¨¨˜ª? I do provide excellent service to every buyer. Please see my feedback before you bid, and see that everyone is happy with my prices, my product .... and my service. Good Day Thanks for looking. In that this item is as costly as it is, I must lay down some ground rules. This is for local pick-up only in Locust Grove, VA 22508. No, I will not and cannot ship it, at least at this point. Next, no nonsense please. Im too old. Dont need it. Getting old is problem enough for me. This is a cash upon your absolute satisfaction sale and do not pay me until you are gloriously happy, pulling out of our driveway. Please read the following: I bought out an entire recording studio, lock stock and barrel for a tidy sum. Among the items was this table. Comes with manuals and vintage warranty registrations. I listed it previously incorrectly, so I opened up the box to take appropriate pictures. I also contacted Jim at VPI, and here is what he told me. Its definitely an Aries 1 model, circa approximately 1994-1995. The arm is indeed a 10-inch (you only measure the armtube) JMW metal unipivot arm. A very solid, substantial table in its day, and lots of them still running from ~30 years ago. And, I received this from a fellow trader kind enough to share his knowledge. One thing VPI didnt tell you about your particular Aries 1 is that in place of the stock platter that came with the table, yours has the platter from the VPI TNT 5.The Aries had a real good platter: 1.25; thick, comprised of a 7/8 thick bottom section made of aluminum (onto which was bonded a thin sheet of lead, covered in cork), with a 3/8 thick top layer of Delrin. The same platter came on the TNT 3 and 4.The TNT 5 has a great one: 1.5; thick, the bottom section 5/8 thick stainless steel (no lead sheet), with a 7/8 thick top Delrin layer. Thats the platter you have, and its the one most VPI aficionados consider the best platter VPI has ever made. Congratulations, it (and the Aries table) is a beauty! There is full inspection available to the buyer, but no returns for any reason, once it meets with your approval. Buyer expected to pay local sales tax as well, so please come prepared, and do not say that this is all you brought. Must be picked up with 3 days. Thanks in advance. Enjoy the music. Dance while you can, and every time you can. Please see my other GREAT items up for sale on ebay!!!

This is a VPI JMW Memorial alignment jig. This came from a high end estate with a large quantity of turntables, all of which had already been liquidated by the time this jig turned up in a cabinet with other audio accessories, therefore I cant tell you specifically if this is for use with the JMW-9, JMW-10 or JMW-12 tonearms so please review the dimensions in the photo to determine if this is right for you. Im almost certain that the tonearm was on a model called the Classic, if that helps any. I measured from the white dot in the center of the grid which is where the stylus will rest, to the V groove of the fork which will be the base of the pivot point where the tonearm will be placed atop and it measured 10.15. The answer seems like it should be obvious to me but I dont want to make any incorrect claims. At any rate, its straight and true and in excellent preowned condition from a non-smoking environment and itll go home with the highest bidder so dont miss it! Ive taken a number of pictures and Ive enabled the scroll over zoom function so you can get an even closer look. So please do have a good look and if this looks right for you, be sure to place your bid TODAY for your chance to take it home! Payment due within 24 hours of auctions end, please. The sooner you pay, the sooner youll receive them. I ship same day or following business day, depending on when the auction ends, so youll get it fast! And as always, local pickup at my home is welcome!

?ª˜¨¨?ª˜¨¨¨¨˜ª¤.¸*•.¸*•¸? ? Super eBayer ??¸•*¸.•*´¸.¤ª˜¨¨¨¨˜ª?¨¨˜ª? I do provide excellent service to every buyer. Please see my feedback before you bid, and see that everyone is happy with my prices, my product .... and my service. Good Day Thanks for looking. In that this item is as costly as it is, I must lay down some ground rules. This is for local pick-up only in Locust Grove, VA 22508. No, I will not and cannot ship it, at least at this point. Next, no nonsense please. Im too old. Dont need it. Getting old is problem enough for me. This is a cash upon your absolute satisfaction sale and do not pay me until you are gloriously happy, pulling out of our driveway. Please read the following: I bought out an entire recording studio, lock stock and barrel for a tidy sum. Among the items was this table. Comes with manuals and vintage warranty registrations. I listed it previously incorrectly, so I opened up the box to take appropriate pictures. I also contacted Jim at VPI, and here is what he told me. Its definitely an Aries 1 model, circa approximately 1994-1995. The arm is indeed a 10-inch (you only measure the armtube) JMW metal unipivot arm. A very solid, substantial table in its day, and lots of them still running from ~30 years ago. And, I received this from a fellow trader kind enough to share his knowledge. One thing VPI didnt tell you about your particular Aries 1 is that in place of the stock platter that came with the table, yours has the platter from the VPI TNT 5.The Aries had a real good platter: 1.25; thick, comprised of a 7/8 thick bottom section made of aluminum (onto which was bonded a thin sheet of lead, covered in cork), with a 3/8 thick top layer of Delrin. The same platter came on the TNT 3 and 4.The TNT 5 has a great one: 1.5; thick, the bottom section 5/8 thick stainless steel (no lead sheet), with a 7/8 thick top Delrin layer. Thats the platter you have, and its the one most VPI aficionados consider the best platter VPI has ever made. Congratulations, it (and the Aries table) is a beauty! There is full inspection available to the buyer, but no returns for any reason, once it meets with your approval. Buyer expected to pay local sales tax as well, so please come prepared, and do not say that this is all you brought. Must be picked up with 3 days. Thanks in advance. Enjoy the music. Dance while you can, and every time you can. Please see my other GREAT items up for sale on ebay!!!

?ª˜¨¨?ª˜¨¨¨¨˜ª¤.¸*•.¸*•¸? ? Super eBayer ??¸•*¸.•*´¸.¤ª˜¨¨¨¨˜ª?¨¨˜ª? I do provide excellent service to every buyer. Please see my feedback before you bid, and see that everyone is happy with my prices, my product .... and my service. Good Day Thanks for looking. In that this item is as costly as it is, I must lay down some ground rules. This is for local pick-up only in Locust Grove, VA 22508. No, I will not and cannot ship it, at least at this point. Next, no nonsense please. Im too old. Dont need it. Getting old is problem enough for me. This is a cash upon your absolute satisfaction sale and do not pay me until you are gloriously happy, pulling out of our driveway. Please read the following: I bought out an entire recording studio, lock stock and barrel for a tidy sum. Among the items was this table. Comes with manuals and vintage warranty registrations. I listed it previously incorrectly, so I opened up the box to take appropriate pictures. I also contacted Jim at VPI, and here is what he told me. Its definitely an Aries 1 model, circa approximately 1994-1995. The arm is indeed a 10-inch (you only measure the armtube) JMW metal unipivot arm. A very solid, substantial table in its day, and lots of them still running from ~30 years ago. And, I received this from a fellow trader kind enough to share his knowledge. One thing VPI didnt tell you about your particular Aries 1 is that in place of the stock platter that came with the table, yours has the platter from the VPI TNT 5.The Aries had a real good platter: 1.25; thick, comprised of a 7/8 thick bottom section made of aluminum (onto which was bonded a thin sheet of lead, covered in cork), with a 3/8 thick top layer of Delrin. The same platter came on the TNT 3 and 4.The TNT 5 has a great one: 1.5; thick, the bottom section 5/8 thick stainless steel (no lead sheet), with a 7/8 thick top Delrin layer. Thats the platter you have, and its the one most VPI aficionados consider the best platter VPI has ever made. Congratulations, it (and the Aries table) is a beauty! There is full inspection available to the buyer, but no returns for any reason, once it meets with your approval. Buyer expected to pay local sales tax as well, so please come prepared, and do not say that this is all you brought. Must be picked up with 3 days. Thanks in advance. Enjoy the music. Dance while you can, and every time you can. Please see my other GREAT items up for sale on ebay!!!

?ª˜¨¨?ª˜¨¨¨¨˜ª¤.¸*•.¸*•¸? ? Super eBayer ??¸•*¸.•*´¸.¤ª˜¨¨¨¨˜ª?¨¨˜ª? I do provide excellent service to every buyer. Please see my feedback before you bid, and see that everyone is happy with my prices, my product .... and my service. Good Day Thanks for looking. In that this item is as costly as it is, I must lay down some ground rules. This is for local pick-up only in Locust Grove, VA 22508. No, I will not and cannot ship it, at least at this point. Next, no nonsense please. Im too old. Dont need it. Getting old is problem enough for me. This is a cash upon your absolute satisfaction sale and do not pay me until you are gloriously happy, pulling out of our driveway. Please read the following: I bought out an entire recording studio, lock stock and barrel for a tidy sum. Among the items was this table. Comes with manuals and vintage warranty registrations. I listed it previously incorrectly, so I opened up the box to take appropriate pictures. I also contacted Jim at VPI, and here is what he told me. Its definitely an Aries 1 model, circa approximately 1994-1995. The arm is indeed a 10-inch (you only measure the armtube) JMW metal unipivot arm. A very solid, substantial table in its day, and lots of them still running from ~30 years ago. There is full inspection available to the buyer, but no returns for any reason, once it meets with your approval. Buyer expected to pay local sales tax as well, so please come prepared, and do not say that this is all you brought. Must be picked up with 3 days. Thanks in advance. Enjoy the music. Dance while you can, and every time you can. Please see my other GREAT items up for sale on ebay!!!

This is a VPI JMW Memorial alignment jig. This came from a high end estate with a large quantity of turntables, all of which had already been liquidated by the time this jig turned up in a cabinet with other audio accessories, therefore I cant tell you specifically if this is for use with the JMW-9, JMW-10 or JMW-12 tonearms so please review the dimensions in the photo to determine if this is right for you. Im almost certain that the tonearm was on a model called the Classic, if that helps any. I measured from the white dot in the center of the grid which is where the stylus will rest, to the V groove of the fork which will be the base of the pivot point where the tonearm will be placed atop and it measured 10.15. The answer seems like it should be obvious to me but I dont want to make any incorrect claims. At any rate, its straight and true and in excellent preowned condition from a non-smoking environment and itll go home with the highest bidder so dont miss it! Ive taken a number of pictures and Ive enabled the scroll over zoom function so you can get an even closer look. So please do have a good look and if this looks right for you, be sure to place your bid TODAY for your chance to take it home! Payment due within 24 hours of auctions end, please. The sooner you pay, the sooner youll receive them. I ship same day or following business day, depending on when the auction ends, so youll get it fast! And as always, local pickup at my home is welcome!

?ª˜¨¨?ª˜¨¨¨¨˜ª¤.¸*•.¸*•¸? ? Super eBayer ??¸•*¸.•*´¸.¤ª˜¨¨¨¨˜ª?¨¨˜ª? I do provide excellent service to every buyer. Please see my feedback before you bid, and see that everyone is happy with my prices, my product .... and my service. Good Day Thanks for looking. In that this item is as costly as it is, I must lay down some ground rules. This is for local pick-up only in Locust Grove, VA 22508. No, I will not and cannot ship it, at least at this point. Next, no nonsense please. Im too old. Dont need it. Getting old is problem enough for me. This is a cash upon your absolute satisfaction sale and do not pay me until you are gloriously happy, pulling out of our driveway. Please read the following: I bought out an entire recording studio, lock stock and barrel for a tidy sum. Among the items was this table. Comes with manuals and vintage warranty registrations. I listed it previously incorrectly, so I opened up the box to take appropriate pictures. I also contacted Jim at VPI, and here is what he told me. Its definitely an Aries 1 model, circa approximately 1994-1995. The arm is indeed a 10-inch (you only measure the armtube) JMW metal unipivot arm. A very solid, substantial table in its day, and lots of them still running from ~30 years ago. There is full inspection available to the buyer, but no returns for any reason, once it meets with your approval. Buyer expected to pay local sales tax as well, so please come prepared, and do not say that this is all you brought. Must be picked up with 3 days. Thanks in advance. Enjoy the music. Dance while you can, and every time you can. Please see my other GREAT items up for sale on ebay!!!

Selling my Walnut VPI Classic 3 Turntable with upgraded bearing & sapphire thrust plate installed by VAS Audio. This table is fitted with the JMW-10.5i tonearm wired with Nordost Reference wiring. I have the original boxes, manual, and accessories. What you see pictured is what you are purchasing. There is a tiny scratch on the rear of the tables walnut shell. Feel free to ask any questions you may have. This setup will ship in 3 separate boxes. Please contact me for a more detailed shipping quote. More information available at US Audio Mart.

VPI JMW-10 3D Tonearm Turntable. Very good condition but review all photographs provided for all details. Audible Elegance is your Audio, Video, and Home Theater Dealer in Cincinnati Ohio, Northern Kentucky and Eastern Indiana featuring many fine products in a home-like and friendly atmosphere.

The worlds largest online retailer of pre-owned audio Product DescriptionWho we areWhat we doOur ProcessOur Policies VPI Prime Belt Drive Turntable; SoundSmith Zephyr MIMC Cartridge; JMW-10 Tonearm Product SKU: 51224 Voltage: 120V # of Owners: 1 Service History: None Serial Number: 16-0003 Age: Unknown Tobacco Exposure: No MSRP: $5198 Cosmetic Description: Very good condition with minimal visible cosmetic wear including some scratches on the metal foot caps on top of the plinth as well as some scratches on the motor unit and the top of the platter. Outstanding condition overall - the condition will please even the most discerning audiophile. What is Included: Turntable, SoundSmith Zephyr MIMC Cartridge, Platter, Belt, Motor, Slipmat, Tonearm, Counterweight, Record clamp, Stroboscope, Cartridge alignment jig, Manual, Power cable, Factory packaging Other Notes: Please note this is the original VPI Prime model, not the updated 2021 model. This turntable features the JMW-10 3D-printed tonearm and a Soundsmith Zephyr MIMC phono cartridge. Functional Notes: Operational condition of this item is excellent, fully tested and no issues found. Shipping: Cost to ship this item within the contiguous United States is a flat rate of $99- including packaging and insurance. For all other locations including Hawaii, Puerto Rico and Alaska, please request a quote prior to purchase. Items with factory packaging will be double boxed. When factory packaging not available re-usable shipping box with custom injected-foam mold will be used. (for all items over 10 lbs). Note that all items valued over $750 will require a signature upon delivery. Your online source for the best value in new and used audio gear. Visit us online to Buy / Sell / Trade / Consign The Music Room is the largest online retailer of pre-owned HiFi equipment in the world. Headquartered in beautiful Boulder Colorado, The Music Room is a team of 17 strong (and growing) music lovers - all dedicated to one singular mission: delivering the very best online shopping experience in the audio industry - period. We specialize in well-cared for, previously used gear because that is what we are passionate about. We feel that there is nothing more fulfilling than creating a high-performance system on a budget with carefully selected used components, speakers and cables. Our program is safe, secure, fast, fair, hassle-free and highly effective. Visit us online to Buy / Sell / Trade / Consign Buy: Are you looking to get a fair price for your used home audio equipment without all the hassles, headaches, risks and fees? We will appraise your equipment and make you a quick, easy, fair cash offer. Just fill out our “get a quote” form on our homepage to start the process. Sell: We sell in multiple online venues with many (but not all) of our products available in our eBay store. Everything is quality-assured and backed by our best-in-class, satisfaction-guaranteed return policy. Trade: Make your budget go further with a generous trade-in allowance. Let us know what you have available, and we’ll get you the best possible trade-in allowance. We can even assist with shipping & logistics from anywhere in the USA. Just fill out our “get a quote” form on our homepage to start the process. Consign: We offer a hassle-free way for individuals and businesses to liquidate used gear. We’ll handle every step of the process from shipping to appraisals, customer service, fulfillment, and returns: Industry-low rates with no hidden fees Leverage our world-class reputation and get exposure in multiple sales venues - putting your product in front of over 570k monthly shoppers. Our program is Safe, Secure, Fast, Fair, Hassle-Free and Highly Effective. With 100% feedback ratings in every venue in which we sell, you can rest assured that we’ve got your back. Visit us online to Buy / Sell / Trade / Consign Quality Assurance: We offer 15-20 new product listings for sale daily. Each product undergoes an extremely rigorous quality-assurance and listening session by one of our qualified technicians. We understand that buying used audio equipment can be rife with uncertainty and unexpected headaches. Our quality assurance program is informed by a knowledge-base built through delivering over 30,000 used audio products to satisfied customers. We promise to deliver your product in good working order - exactly as described 100% of the time. Support: We don’t just make promises. We stand behind them - your satisfaction is guaranteed. Our support team is ready to help you with any questions you might have before and after the sale. Value: In the never-ending pursuit of high performance, it’s important to stretch your limited budget as far as possible. Used equipment sells for a fraction of new prices, and with a partner like The Music Room you can upgrade any time you like and get most of your money back. There’s simply no better way to maximize a limited audio budget. Packaging: We’ve invested thousands of dollars and countless hours into mastering our state-of-the-art packaging process. Our custom foam-in-place packaging system allows us to safely package almost any item regardless of irregular shapes or sizes. Most importantly, this system provides our customers with a re-usable shipping box which increases the resale value of the product and provides a shipping method for easy, secure returns. Be seen by over 70,000 monthly visitors. Visit us online to Buy / Sell / Trade / Consign Payment: Prompt payment is expected. Paypal is preferred but all forms of payment are accepted. Unpaid item case will be opened after 3 days if no payment received. Shipping Times: Most Domestic orders ship within 1 business day of purchase. For International orders or freight shipments, please allow 2-3 business days. In all cases, tracking information will be emailed to you at the moment the shipping label is created. If you cant find it or have other questions about shipping & logistics, please contact us. Shipping Costs: Flat rate shipping costs are applicable within the contiguous 48 States (USA). These rates are clearly posted on each product page. For an International or custom quote (including Hawaii, PR, AK) please contact us. Returns: Every purchase made on eBay carries a 30-day, satisfaction-guaranteed return policy. If youre not happy with your purchase for any reason or if youve simply changed your mind... no problem. Simply ship it back for a full refund or exchange (minus S&H costs). If you have received an item that is defective in some way, we will make it right. Let us know - we will pay for return shipping and repair the item or refund 100% of your original purchase price.

Follow us| Sign up for our newsletter VPI JMW-10 3D - Audiophile Quality 10 3D Printed Tonearm with Original Box For over 20 years High End Audio Auctions has been selling the finest HiFi online, but did you know that we BUY your HiFi equipment as well? Contact our sister company STEREOBUYERS for a fair quote today! All items included are pictured. Items are tested fully to ensure all functions work as expected - any defects and additional service done to the item are noted below. Items are not restored or reconditioned, unless specified. All items we sell come with a 30-day warranty - your satisfaction is guaranteed. Original shipping on returns will be refunded at the sellers discretion. Local Pickup in NYC Available VPI JMW-10 3D Details & Testing Notes Cosmetic Condition:9/10: Excellent - light use, no visible imperfectionsFunctional Notes:Functions as intended and sounds great.Other Notes:160g CounterweightSerial #:101337Original Box:YesManual:YesShipping Method:FedEx Ground (Domestic) / USPS Priority, Ebay Standard Delivery (International)Shipping Weight (lbs):3 (20x6x6) High-End Audio Auctions has been THE trusted source for high-end, classic and vintage audio components on eBay since 2000! Our unique products, unparalleled service and bombproof packaging keeps our customers coming back again and again. We are experts at selling and shipping worldwide, with items ranging from $5 to $50,000. We look forward to earning your repeat business! By placing a bid on any of our listings, you agree to our terms & conditions Click here to learn more Home| About Us| Store Policies| FAQs| Feedback| Contact Us| Custom Tuned Cables _gsrx_vers_1516 (GS 9.3 (1516))

* FREE Shipping to mainland USA. * * International Shipping with charge. * ------------------------------------------------- ITEM DESCRIPTION: For sale is a VPI tonearm base for VPI unipivot armwand. This one has the housing for fluid damping for suitable armwand either 9 or 10 or 10.5 or 12 arms. Its also the similar base from the Classic turntable with 10 arm. Bearing spike still sharp in good condition. Great for restoration or DIY projects so you can build your own unipivot design tonearm. It has signs of use and age. Please check pictures before bidding. Item will be well packed for safe arrival. ------------------------------------------------- WORKING CONDITION: Works. ------------------------------------------------- PHYSICAL CONDITION: Used with signs of age. Check pictures for cosmetic condition -------------------------------------------------------- SHIPPING:FREE Shipping to USA via USPS. Priority Mail Medium Flat Rate Box.Local pick up is welcome with no charge. ------------------------------------------------- RETURN: Item has been described to the best of my knowledge and please ask questions before bidding. Due to nature of used equipment, item is being sold AS IS, NO RETURN. ------------------------------------------------- PAYMENT: PayPal or cash for local pick up. Pay within 3 days after end of auction. ------------------------------------------------- OTHERS: Any dispute can be resolved with friendly message exchange so please contact me first before involving eBay. Dont forget to check my other auctions! --------------------------------------------------------

VPI Classic 2 Turntable · Very Good+ condition · Please closely look at photos for many details · Complete w/ Power Supply, Setup jig etc. · Record clamp, mat included · Interconnect cables, cartridge not included · Ships in two [heavy] original factory cartons $1,999 to your door (with 8% tax & $99 shipping) Normal 0 false false false EN-US X-NONE X-NONE

VPI JMW 10.5 Tonearm with Tonearm Base. Fantastic Unipivot tonearm from VPI Industries USA. Condition is excellent and minimum usage and stored away for number of years and better go to someone who will make most of it. It comes with mint condition tonearm wand + Tonearm Base. NOTE: Only piece missing is tonearm rest/holder piece (see below link). It can be easily sourced or purchased from VPI Industries.https://vpiindustries.com/products/vpi-printed-slipmat Other than little tonearm holder, all there and also comes with full original packaging. BONUS: I will also include most parts of VPI JMW 10.5 Tonearm Anti-Skate Upgrade which is worth over $300. There are rubber rings, nylon string, mount ring are missing . Major metal parts are there for new owner to utilise to set up the antiskate. https://www.ebay.com.au/itm/392296065574 Thank you for reading.

VPI JMW 10 Classic Tonearm Wand + Nordost Valhalla Reference wiring + Dual Pivot. For sale here is the VPI 10 Classic Tonearm aluminum wand. It has upgraded Nordost Valhalla Reference wiring and includes the Dual Pivot which prevents the uni-pivot wobble.The upgraded Nordost wiring is a big deal. It really helps to bring out the detail in the music. Vastly superior to the VPI pure copper wiring. This is a Stereophile Class B tonearm.It is in like new condition in perfect working order.Retail for the arm and the dual pivot is $1400. Free shipping to the USACartridge not included. Sale is for the arm wand only.