I purchased this new in February 2023 for about $4100 for the turntable, tonearm and cartridge. Has only about 30-40 hours on it. In excellent like new condition. Comes with all original accessories, manual packaging and box. Taking the design cues of the Prime Scout, the Scout 21 is an evolution of its predecessor with and improved 300 RPM motor housing, and improved isolation feet. Paired with a JMW 9 Tonearm! Chassis Composition: Vinyl Wrapped MDF and Steel Platter Type & Size: 11.5 Aluminum, 10.5 lbs Tonearm Included: JMW-9 Tonearm Motor RPM: 300 RPM Motor Pulley: +/- .0005 Wow and Flutter: .08% Speed Accuracy: .08% Rumble: 78 db Down Footprint: 18 ½ x 14½ Overall Size: 19 x 15 x 8½ Total Weight: 32 lbs

Great table selling as is where is no catrige missing belt

VPI Scout 1.1JMW-9 Tonearm EXCELLENT WORKING CONDITION ! NEAR MINT, NOT A SMUGH OR MARK ON IT ,LOOKS NEW ! Included New Hanna Moving Coil Cartridge $800.00 msrp ! WORKING PERFECTLY ! Comes with a CUSTOM DUSTCOVER CHECK OUT OUR STORE FOR RARE AND HARD TO FIND VINTAGE AUDIOPHILE AUDIO EQUIPMENT !

$90 JMW memorial tonearm alignment jig for VPI turntables, a must have VPI owners! Gently used condition, as new Works only with the VPI JMW-9 & JMW-9 Signature tonearms.The VPI Alignment Jig is a simple to use, accurate alignment jig for setting cartridge measurements. The VPI Alignment Jig addresses the three most important factors of alignment: Proper Offset, Tracking and Overhang. The VPI JMW alignment jig is a simple-to-use, accurate alignment jig for setting cartridge measurements. The JMW alignment jig addresses the three most important factors of alignment: Proper Offset, Tracking, and Overhang. It is a Denison jig using LÖFGREN B

This VPI Scoutmaster turntable is a must-have for any music enthusiast. With its sleek black design and belt drive feature, it offers high-quality audio playback. The JMW-9 Signature model adds a touch of sophistication with its fine-tuned components. Whether you're a vinyl collector or just starting out, this turntable is the perfect addition to your home audio setup. Its brand name speaks for itself and its features are sure to impress. Don't miss out on the opportunity to own this exceptional piece of equipment. This gorgeous turntable is in very good condition, non-smoking environment. It comes with many extras had to put the original feet on turntable to ship, comes with the two tone arms as seen in the pictures,a weight scale , anti-skate,upgraded feet, real nice cover that will be shipped separately this VPI scoutmaster will be a nice addition to your audio collection. it will come with no cartridge.I had the Ortofon M2Black and loved it. United States shipping only. thank you for looking.

VPI Aries Scout turntable & JMW-9 tonearm.Legendary model from VPI that is still considered the best sounding machine in its price-range.Made in USA It is in excellent condition and looks and performs as new. Comes with extra bonus items: - Two custom record mats- Anti-vibration plates, that further improve the sound- Anti-static connection cable I have the original double-box and packaging materials, so safe shipping is guaranteed. Also included all manuals and brochures. Find this ad on the usaudiomart site (search by same description) for lower and tax-free pricing. You can check my 100% positive feedback there “Rather, this is a flat-out, unconditional, “Holy Mother of Crap, I can’t believe how good this thing is” recommendation. It’s hard to imagine another way of spending $****.** that will add this much to your system.” – Art Dudley, Stereophile Magazine Description: Two-speed, belt-driven turntable with AC synchronous motor, acrylic record platter, and Delrin reflex record clamp; aluminum-alloy unipivot tonearm, height-adjustable, with interchangeable armwands. Wow & flutter: <0.02%. Rumble: below -80dB. Speed accuracy: within 0.1%. Dustcover: none. Spindle-pivot distance: 222mm. Downforce calibration: none. Antiskating: none.Dimensions: 19 W by ca 4.5 H by 14 D (without dustcover). Weight: 37 lbs.Finish: Black semigloss enamel (turntable), textured aluminum (tonearm). The Turntable:1.25? thick premium textured vinyl covered MDF bonded to a 12 gauge steel plate.Machined 1 3/8? thick 6061 acrylic platter.Platter rotates on an oil bath bearing and fitted to shaft with a #2 Jacob’s Taper for a concentric rigidly mounted coupling.The bearing has a PEEK thrust disc and machined graphite impregnated brass bushings using a Thompson Engineering 60 Rockwell case hardened shaft.300 RPM AC synchronous motor is contained in a separate steel housing and drives the platter with smooth, quiet operation.Includes a screw down record clamp that eliminates warpsCartridge not includedTechnical SpecificationWow and Flutter: .08% WRMSSpeed Accuracy: .08%Rumble: >78 db DownFootprint: 19 ½” x 13 ¾”Overall Dimensions: 21?” x 15¾” 54lbs packing weightTechRadar: Of VPIs seven-strong range of turntables, the Scout is the New Jersey-based manufacturers most affordable offering: with a price of under £1,600, it must be the least expensive US made turntable on the market.But, what it lacks in price, the Scout makes up for in size, being easily the widest turntable in the group, although it just about fits on a standard width equipment support.Furnished with a solid plinth design with a separate freestanding motor block, the Scouts only means of keeping stand-bound resonance at bay are Sorbothane mountings above each of the conical feet. The latter are tipped with a ball, rather than a spike, that will be a lot kinder to supporting surfaces.The plinth is composed of MDF atop a steel plate, while the platter is a 34mm slab of acrylic that sits on an inverted bearing with a Teflon thrust pad and a case-hardened shaft.The motor sits in a steel box that accepts a kettle lead, but cleverly hides this junction underneath the turntable. What you do see is a switch sticking out that turns it on and off. Drive is via a round section peripheral belt and speed change is a matter of flipping the belt onto the lower pulley for 45rpmThe JMW9 tonearm is a unipivot design thats beautifully finished but a pain to set-up, thanks to the wobbly nature of the genre. It has a sharp tip that acts as the bearing point and a rather ineffectual arm clamp that does little to hold it in place.The Scout does most things better than average and its good quality finish and build combine with this to make for an attractive package. The unipivot JMW9 is easily the most impressively built tonearm in this group and, for those who like using alternative cartridges, it offers the easiest means to swap the things over if you buy a second arm wand.

This VPI Scout turntable comes with the JMW 9 Memorial Tonearm, Audio Technica AT-VM95SH MM cartridge and stylus. Belt drive - 45RPM or 33.3RPM. Table is used - rated good condition due to uncertain age. Table includes dust cover and accessories as shown. Ships in original box. Dust cover ships separately.

PREOWNED - $2800 LIST! - FULLY TESTED - INCLUDES ORIGINAL BOX/PACKING, MANUAL, 20LBS/12 PLATTER, 300RPM MOTOR UPGRADE, CONE FEET, CLAMP, POWER CABLE, ALIGNMENT JIG, 2 DRIVE BELTS, ANTI-SKATE WEIGHT, MAT, COUNTER INTUITIVE

This is a VPI JMW Memorial alignment jig. This came from a high end estate with a large quantity of turntables, all of which had already been liquidated by the time this jig turned up in a cabinet with other audio accessories, therefore I cant tell you specifically if this is for use with the JMW-9, JMW-10 or JMW-12 tonearms so please review the dimensions in the photo to determine if this is right for you. Im almost certain that the tonearm was on a model called the Classic, if that helps any. I measured from the white dot in the center of the grid which is where the stylus will rest, to the V groove of the fork which will be the base of the pivot point where the tonearm will be placed atop and it measured 10.15. The answer seems like it should be obvious to me but I dont want to make any incorrect claims. At any rate, its straight and true and in excellent preowned condition from a non-smoking environment and itll go home with the highest bidder so dont miss it! Ive taken a number of pictures and Ive enabled the scroll over zoom function so you can get an even closer look. So please do have a good look and if this looks right for you, be sure to place your bid TODAY for your chance to take it home! Payment due within 24 hours of auctions end, please. The sooner you pay, the sooner youll receive them. I ship same day or following business day, depending on when the auction ends, so youll get it fast! And as always, local pickup at my home is welcome!

New never used, I paid over 1k dollars.

This is a VPI JMW Memorial alignment jig. This came from a high end estate with a large quantity of turntables, all of which had already been liquidated by the time this jig turned up in a cabinet with other audio accessories, therefore I cant tell you specifically if this is for use with the JMW-9, JMW-10 or JMW-12 tonearms so please review the dimensions in the photo to determine if this is right for you. Im almost certain that the tonearm was on a model called the Classic, if that helps any. I measured from the white dot in the center of the grid which is where the stylus will rest, to the V groove of the fork which will be the base of the pivot point where the tonearm will be placed atop and it measured 10.15. The answer seems like it should be obvious to me but I dont want to make any incorrect claims. At any rate, its straight and true and in excellent preowned condition from a non-smoking environment and itll go home with the highest bidder so dont miss it! Ive taken a number of pictures and Ive enabled the scroll over zoom function so you can get an even closer look. So please do have a good look and if this looks right for you, be sure to place your bid TODAY for your chance to take it home! Payment due within 24 hours of auctions end, please. The sooner you pay, the sooner youll receive them. I ship same day or following business day, depending on when the auction ends, so youll get it fast! And as always, local pickup at my home is welcome!

Follow us| Sign up for our newsletter VPI Scout - Audiophile Belt Drive Turntable with JMW 9” Tonearm + Factory Box For over 20 years High End Audio Auctions has been selling the finest HiFi online, but did you know that we BUY your HiFi equipment as well? Contact our sister company STEREOBUYERS for a fair quote today! All items included are pictured. Items are tested fully to ensure all functions work as expected - any defects and additional service done to the item are noted below. Items are not restored or reconditioned, unless specified. All items we sell come with a 30-day warranty - your satisfaction is guaranteed. Original shipping on returns will be refunded at the sellers discretion. Local Pickup in NYC Available VPI Scout Details & Testing Notes Cosmetic Condition:8/10: Very Good - flawless front face, other minor imperfectionsCosmetic Notes:Faint scratches on plinth + aminor chip on lower front edge of plinth on the right side near the badge. Very good overall physical condition otherwise. Please see all high resolution photographs below.Functional Notes:Functions as intended and sounds great.Voltage:120V 60HzSerial #:621Original Box:New Factory BoxManual:YesPower Cord:YesShipping Method:FedEx Ground (Domestic) / USPS Priority, Ebay Standard Delivery (International)Shipping Weight (lbs):30 (24x18x12) High-End Audio Auctions has been THE trusted source for high-end, classic and vintage audio components on eBay since 2000! Our unique products, unparalleled service and bombproof packaging keeps our customers coming back again and again. We are experts at selling and shipping worldwide, with items ranging from $5 to $50,000. We look forward to earning your repeat business! By placing a bid on any of our listings, you agree to our terms & conditions Click here to learn more Home| About Us| Store Policies| FAQs| Feedback| Contact Us| Custom Tuned Cables _gsrx_vers_1516 (GS 9.3 (1516))

VPI Aries Scout Turntable with JMW-9 Tonearm, excellent condition, boxed. This is a very well looked after turntable and a credit to the one previous owner. American VPI Industries have in excess of 40 years creating a vast array of highly regarded turntables and tonearms. Lots of info online and some eye watering figures grace their current line up. This is offered in its original box with original packing and all accessories, complete with manual.

VPI JMW-9 Tonearm (Tonearm only- Turntable and Cartridge not included) 9 Metal Tonearm for VPI Turntable Tonearm model from 2008 Compatible with current/modern turntables. Cables have been tested for functionality