Old & Early Silver Western Electric 68A FILTER. Measures 3 1/2 x 5 x 5 1/8. Net Weight 6.8 lbs/3.1kg. I am unable to find any information on this early Western Electric 68A FILTER. There is no date code on the unit. Presumably from the mid 1930s era. Possibly good for crossover unit for hooking up Western Electric horns. Measured 1+2 terminals read 19.1 Ohms. No readings on other terminals. Perhaps terminals needed to be connected for good readings. Previous owner years ago wrote down some specs on the transformer itself. I cant guarantee the numbers/figures written are the gospel truth. Thank You and Good Luck : ) : )

This is a Western Electric 551 Horn Driver. Please check the ohm reading. Please take a look at the photos and the video. It seems work very well. But this is as is. The RCA horn on the video is not the part of the sale. What you see is what you get. No Refund and No Return.

You are bidding on a Western Electric Type 549W Horn Speaker Driver from the 1920s. The driver itself is mounted inside a case, with a Type 8-B mounting bracket. The driver is good measuring about 1200 ohms. It is in nice all original condition. I removed the driver from the case so that the type number could be read, and photos taken. There are still seals on the screws that would allow a look inside the driver, so I left them intact, and did not look inside. This was apparently owned by station KMBC, as those call letters are lightly scratched in the case and bracket. The cap over the threaded nipple for attaching the horn is still present. I believe the threads are the same as for a 555 driver. The driver itself, with cap, are black painted solid brass. The case and bracket are black painted iron. It has a nice original Western Electric decal on one side. This driver is not encountered as often as the similar 551W, and the case and bracket are seldom seen. It measures roughly 6 1/8 by 4 1/2 inches in cross section, and is 7 3/4 inches in overall length. It should be a great driver for your horn! Shipping weight is 11 pounds. No shipping to China. Please see my other auctions for more interesting radio and audio items, and tubes.

For sale: original 35 feet (~ 10.7 meters) wire for WE 555 horn driver marked “Middle Frequency ” from WE 1086/87B amplifier system used in Talkie Movie Theater with 1935 ERPI “Mirrophonic” Sound System in New York City. Wires used to provided connection between output sound coil power distribution cabinet/ WE TA-7275 speaker crossover in amplifier/projector room and stage. See pictures of junction box and stage horns distribution box (not included). Actual length is about 35 feet. Solid tinned copper conductor is about 14 Gauge (1.7 mm diameter) in tight braided Black fabric jacket. Wires are very dusty from removing during demolition. Insulation condition: conductor is good and bright after 70 years, pulled from metal tube conduits, see pictures. Wires sold AS IS no return because of age. We combine items for shipping. ?

Vintage Western Electric Single Ear Headphone Magnetic 32 with Horn Mic AntiqueWestern Electric.ingle Ear Headphone Magnetic 32.With Horn Mic Antique.Made in USA.Please see the picture for item condition details.If you have any questions, dont hesitate to contact me and Ill get back with you right away.I strive for customer satisfaction and take great pride in my customer service. This can be seen in my customer reviews.Ruler Not Included

Western Electric 3A horn in excellent condition, fits WE555 driver. What you see is what you get. No refund and No return.

For sale single piece of 34 feet (11 meters each) stage horn speaker wires from WE Mirrophonic amplifier system used in mid-late 1932-35 Talkie Movie ERPI Theater in Brooklyn NY. Wires used to provided connection between wall mounted network cabinet and horn speakers on stage behind the screen. Actual length is about 35 feet there are 2 tight wires in natural rubber inside fabric braid covered wit rubber jacket, stranded conductors made of WE’s hard drawn copper about 18 Gauge in old black/white fabric and natural rubber. Insulation condition: dusty old but very good and flexible after 80 years, see pictures. Wires sold AS IS no return because of age. We combine items for shipping. ?

For sale pair (2 pieces) of 19 feet (5.8 meters each) stage horn speaker wires from WE Mirrophonic amplifier system used in mid-late 1932-35 Talkie Movie ERPI Theater in Brooklyn NY. Wires used to provided connection between wall mounted network cabinet and horn speakers on stage behind the screen. We also have Field coil wires WE High and Middle frequency drivers. Actual length is about 19 feet there are 2 tight wires in natural rubber inside fabric braid covered wit rubber jacket, stranded conductors made of WE’s hard drawn copper about 18 Gauge in old black/white fabric and natural rubber. Insulation condition: very good and flexible after 80 years, see pictures. Wires sold AS IS no return because of age. We combine items for shipping. ?

This is a Western Electric 551 Horn Driver in Excellent Condition. Please take a look at the photos and the video. It works very well. The RCA horn on the video is not the part of the sale. What you see is what you get. No Refund and No Return.

You are bidding on a Western Electric Type 549W Horn Speaker Driver from the 1920s. The driver itself is mounted inside a case, with a Type 8-B mounting bracket. The driver is good measuring about 1200 ohms. It is in nice all original condition. I removed the driver from the case so that the type number could be read, and photos taken. There are still seals on the screws that would allow a look inside the driver, so I left them intact, and did not look inside. This was apparently owned by station KMBC, as those call letters are lightly scratched in the case and bracket. The cap over the threaded nipple for attaching the horn is still present. I believe the threads are the same as for a 555 driver. The driver itself, with cap, are black painted solid brass. The case and bracket are black painted iron. It has a nice original Western Electric decal on one side. This driver is not encountered as often as the similar 551W, and the case and bracket are seldom seen. It measures roughly 6 1/8 by 4 1/2 inches in cross section, and is 7 3/4 inches in overall length. It should be a great driver for your horn! Shipping weight is 11 pounds. No shipping to China. Please see my other auctions for more interesting radio and audio items, and tubes.

Pair Western Electric 10-D Loud Speaking Telephone Horns ( No Drivers) This is for a pair of horns ( no drivers) . Sold as is. See photos for cosmetic condition. One looks to have been painted. Due to age these items are being sold AS IS.Disclaimer: When buying almost 50 and 50 plus year old electronic equipment that has not had all parts replaced with new parts there is always the possibility with failure to the 50 year old part/s at any time. Some of the electronic part/s may continue for another 50 years without need of replacement and some electronic part/s may fail a few days after you start using the item.Please visit our store as we get vintage electronics of tube,test,solid state, hifi, audio, etc Many great and rare items as well.

Western Electric 10-D Loud Speaking Telephone Horn Driver and Horn Sold as is untested . Sold as is. See photos for cosmetic condition. Due to age these items are being sold AS IS.Disclaimer: When buying almost 50 and 50 plus year old electronic equipment that has not had all parts replaced with new parts there is always the possibility with failure to the 50 year old part/s at any time. Some of the electronic part/s may continue for another 50 years without need of replacement and some electronic part/s may fail a few days after you start using the item.Please visit our store as we get vintage electronics of tube,test,solid state, hifi, audio, etc Many great and rare items as well.

Auction for 2 IPC LU1049 horn for western electric 555 Please take a look all pictures. I do this for living.I know How to packed.Maybe you will pay little Bid.But I m sure you will be more than happy to pay.You know why. Because u will receive your item in one piece. Shipping International 245.00. Buyer has to declare costume at your country.

Vintage Western Electric Single Ear Headphone Magnetic 32 with Horn Mic AntiqueWestern Electric.ingle Ear Headphone Magnetic 32.With Horn Mic Antique.Made in USA.Please see the picture for item condition details.If you have any questions, dont hesitate to contact me and Ill get back with you right away.I strive for customer satisfaction and take great pride in my customer service. This can be seen in my customer reviews.Ruler Not Included

1930s RCA Photophone Theatre Monitor Horn Speaker Jensen Western Electric Era. Good working speaker. Bell is aluminum and 15” wide. The length of the speaker horn is 14”. Good ohms, my meter was set on 200. Worldwide shipping and expert packing.

For sale is a Western Electric brass throat Nut for WE horns. The sale is only for the nut. The horn, throat and 555 are for display purposes and not for sale. Sold as is and No Returns.

Auction for 2 Vintage RCA XT-3083 Horn Speakers Matching Transformer. guarantee all good transformers .Please take a look all pictures. I do this for living.I know How to packed.Maybe you will pay little Bid.But I m sure you will be more than happy to pay.You know why. Because u will receive your item in one piece. Shipping International 115.00. Buyer has to declare costume at your country.

For sale is a Western Electric brass throat Nut for WE horns. The sale is only for the nut. The horn, throat and 555 are for display purposes and not for sale. Sold as is and No Returns.

Antique Western Electric brass plate logo (Vintage Lafayette RCA Horn amplifier). Vintage Plate from a theatre 1950s

1 Tweeter con tromba Cinemeccanica made in italia , perfettamente funzionante . Ho misurato limpedenza è di circa 7 ohm. E in buono stato, come da foto .

You are bidding on a Western Electric horn speaker from the early 1920s. It is in fairly nice condition and the driver is good, measuring about 100 ohms. The brass bell/neck appears to be the same as for the Model 182AW shawphone horn. The driver is smaller than for the shawphone, and has no markings. The driver measures 2 3/8 inches in diameter. The bell is 3 1/2 inches in diameter for an overall height of 12 1/2 inches. I had to add one layer of paper card around the end of the neck for the bell to fit tightly in the driver. It is an interesting horn. It should be great for your Western Electric collection. Shipping weight is 3 pounds. No shipping to China. Please see my other auctions for more interesting radio and audio items, and tubes.

Tweeter con tromba Electron marrè made in italia , perfettamente funzionante . Ho misurato limpedenza è di circa 14 ohm. E in buono stato, come da foto .

Tweeter con tromba Goodmanns Normal 0 14 false false false IT X-NONE X-NONE trebax 5K/20XL completo di potenziometro originale , perfettamente funzionante . E in buono stato, ha solo alcuni graffi come da foto .