Shipping: All items will be packed safely in a sturdy package for safe shipping. We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. This is the main conical TURNTABLE SHAFT on which the MAIN PLATTER sits. It is shown in pictures 1 - 5 This shaft is used in most Garrard turntables from 1950- 1960, Type A A70 RC 88 98 121 210 This is a main part of the platter bearing. Pls note that for proper function you will also need the upper bearing race washer, which fits at the bottom of the shart. Without this, the turntable will not run on the bearing balls. Pls check my other listings FOR ILLUSTRATION I AM SHOWING THE COMPLETE Thrust Bearing assembly in the last picture. The Additional parts are NOT INCLUDED CONDITION: very clean, tested runs great. The inner bronze bearings are in perfect shape, smooth without scratches. I am selling parts from a Garrard Lab 80 turntable. Pls check the link below for more Lab 80 parts. If you need a part from the mechanism or dont see the part listed, shoot me a message. Click here for more Garrard Turntables and Parts Item will be carefully boxed for safe shipping. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Turntables, Catalogs, Phonograph Items, books and records! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am parting out a Garrad RC88 turntable, pls let me know if you need other parts ***Click here for more Garrard Turntables and PartsThis GARRARD Speed SELECTOR LEVER KNOB is from a TYPE A turntable. (THE COVER IS FOR ILLUSTRATION ONLY - NOT INCLUDED) Will fit also Garrard turntables RC209 and 210Sits on top of the Speed Selector lever of the turntableMolded tan plastic, polished aluminum scale, size 3/4 x 3/8, 3/8 highThe knob is just pressed onto the end of the L-shaped speed leverlCONDITIONClose to new condition, no chips cracks or scratches Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day.FIRST PICTURE FOR ILLUSTRATION ONLY.This GARRARD PLATTER RETAINING CLIP Turntable Circlip Part 53176 comes from a A70 Transcription turntable.Part is used on all turntables from the 1950s and early 1960s, RC88 98 120 121 210 and Type A A70 and their MKII versions.The clip is put in a groove on top of the main spindle and holds down the (sub)platter. When it is missing, the bearing balls may fall out of the main platter bearing on some turntables.*** I have parts available for Garrad Lab 80 A70 Type A RC88/98 ype A turntable, pls let me know if you need other parts ***Click here for more Garrard Turntables and PartsBlackened Steel Circlip with domed washer and rubber ring. Inner Diameter about 9/16CLOSE TO NEW CONDITION, no scratches or marksPls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am selling parts from Garrard Type A turntable. Pls check the link below for more parts. If you need a part from the mechanism or dont see the part listed, shoot me a message. Click here for more Garrard Turntables and Parts This idler wheel for REPAIR/ RE-TYRING: shiny and flexible rubber, but rim has several flat spots, where the turntable was left in On position for a long time, Runs noisy and bumpy Comes from a Type A, used in most RC models from RC88 98 120 Type A to LAB 80Metal plating is shiny, bushing is tight and runs freely. Idler drive wheel for Garrard record changers. Replacement Comments:Replaces Garrard part 53883 used in Type A, Type A Mk II, A70, A70 Mk II, Lab80, Lab80 Mk II, RC88, RC88 Mk II, RC88/3, RC88/4, RC98, RC98/3, RC98/4, RC120, RC121, RC121/3, RC121/4, RC121/11, RC210, T11, TA Mk11, 4SP.Specifications:OD (inches): 2.250ID (inches): 0.170Height (inches): 0.550Thickness (inches): 0.105 I am selling parts from Garrard Type A turntable. Pls check the link below for more parts. If you need a part from the mechanism or dont see the part listed, shoot me a message. Click here for more Garrard Turntables and Parts All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Turntables, Catalogs, Phonograph Items, books and records! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. GARRARD Turntable MAIN POWER SWITCH This is the brown plastic box mounted on the chassis under the turntable where the switch/ brake lever of the turntable inserts a round piece of brass to close the contact between the two copper strips Click here for more Garrard Turntables and PartsThis is the first generation of the switch made from brown plastic bakelite. It is identical to what was used in early hammertone grease bearing Garrard 301 (but will also fit later 301s), as well as the later Type A. This switch is used from the early RC88 and most of the RCXX series up to the A70 and Type A Switch made from brown bakelite, 1 3/4x 1 1/4x 1/2 with two copper contact strips. Includes the two mounting screws, nuts and washers, one about 3/8 long, the second one 1.5 long for mounting the capacitor/spark supressor Includes the small screw that attaches the top to the switch body Condition: Item is in close to new condition, undamaged and uncorroded. Great care has been taken to preserve all the screws, nuts, lock washers, and leave them in the right order. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. GARRARD POWER SUPPLY CONNECTING & VOLTAGE CHANGE-OVER BLOCK used on Garrard 301 Type A, RC88 and most pre-Lab 80 turntables (Yep, thats what its called) SECOND GENERATION block with 110 Volts hard wired. Voltage can still be changed by re-soldering the motor leads in the back of the block(motor coils in series for 110V, in parallel for 220V)The junction box where the power cable goes in, the four motor wires go out and the wires to the switch go out. This junction box came out of an Garrard Type A turntable. It is identical to what was used in Garrard 301 , as well as the later Type A, as well as the RCxx series, except for the RC98 and the 4HF. Junction box made from brown bakelite plastic, 2x 7/8x1. CONDITION: Item is in close to new condition, undamaged and uncorroded. Short stubs of wire have been left for connection, the two wires to the switch are full length about 13 Great care has been taken to preserve all the multiple nuts, washers and lock washers, and leave them in the right order. Click here for more Garrard Turntables and Parts All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. FIRST PICTURE FOR ILLUSTRATION ONLY, Screw and TONEARM NOT INCLUDED.This tiny 4mm coil spring and 1/16 bearing ball sit inside the tonearm bushing facing inwards, when the tonearm is removed, these parts usually just fly away.The spring provides the necessary tension to the tonearm bearing, so that the bearing is tight. Without the spring, the tonearm bearing will be sloppy, which affects the sound reproduction.These parts come from a GARRARD Type A Transcription turntable. Also used on the Type A 4HF Turntable and TPA12 Tonearm Click here for more Garrard Turntables and Parts Condition: close to newPls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am selling parts from a Garrard Type A turntable. Pls check the link below for more Lab 80 parts. If you need a part from the mechanism or dont see the part listed, shoot me a message. Click here for more Garrard Turntables and Parts From a working GARRARD Type ATranscription TURNTABLE with the same form factor and mounting used in Garrard Turntables from about 1950-1960 This spark suppressor is used in Garrard 301 4HF Type A A70 RC88 98 120 121 210 Lab 80 (both the MKI and Mark II versions) value .05 mF +220 Ohms Capacitor has been tested and has no creep current or leakage, the resin filling is perfectly original, none of the dripping or oily residue on failing capacitors. Size: 3/4x 3/4 x 1 ( 1 1/8 incl mounting loop) about 5 wire leads long enough to connect them to the main switch Suppressor mounts under the main switch, it will fit over the longer screw of the switch CONDITION Item is in close to new condition, undamaged and uncorroded. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am parting out a Garrad Type A turntable, pls let me know if you need other parts ***Click here for more Garrard Turntables and PartsThis GARRARD Type A AUTOMATIC On REJECT/ Off THIS IS THE RIGHT SIDE ONE of the two levers. They are different. This one has a small groove at the bottom where the screwed collar fits Will fit also Garrard turntables RC209 and 210Molded tan plastic knob on metal lever and round shaftCONDITIONClose to new condition, plastic knob in great shape, metal shiny and uncorroded, Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am parting out a Garrad RC88 turntable, pls let me know if you need other parts ***Click here for more Garrard Turntables and PartsThis GARRARD ON/ OFF/ AUTOMATIC REJECT SELECTOR Trim is from a TYPE A turntable. Will fit also Garrard turntables RC209 and 210Covers the Manual Off On and Automatic Off - On Reject levers of the turntableMolded tan plastic, raised black Garrard logo and polished aluminum, size 3 x 1 1/2Garrard mounted these by twisting the little tabs of the cover plate. Those tabs break off when removing the cover.Tabs are still about 2mm long and will seat cover securely on the chassis. A drop of contact cement or superglue will hold it in place.Otherwise:Close to new condition,aluminum and Garrard logo in perfect shape. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. Vintage ORTOFON ESL HEADSHELL used on the ESL-1000 Tone ArmHeadshell has issues: Original Grip is missing, headshell got some heat exposure, probably from a soldering iron: bottom edge a bit ragged, the plastic body has slightly sagged, as seen from the front, the left side should is perhaps 1mm lower than the right side. Not sure how this affects the mounting posts, but could possibly be compensated with a spacer.Of the 4 connecting pins, 2 have sunk into the plastic, Condition: Black plastic body with the ESL cover plate taped to the top. 4 leads w original clip Original distance posts but no screws Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. Click here for more Garrard Turntables and PartsUltra Rare BROWN Plastic GARRARD Four Pin HEADSHELL Part No MPM5 used only on the Garrard RC88 MKII Turntable (which is basically a Type A in brown paint) This is a perfect example with a black grip and brown plastic body. Also has the embossed silver Garrard shield to cover the hole on top.Comes with an original Electrovoice flip over crystal cartridge Garrards Description The Garrard Type MPM5 Multi-Purpose pickup case has been designed for use on the Garrard Model RC210 and Type A automatic record changer. This pickup case will, with the aid of the accessories supplied with it. enable a wide range of pickup cartridges to be fitted. A thin bakelite section known as a knockout, which can be easily broken away, is provided in the front of the case through which can pass the knob of turnover type cartridges and a hole is located in the top of the case, covered by the Garrard name plate, for the knob of the turn round stylus type of cartridge. As this pickup case can easily be plugged in and out of the pickup arm, single stylus cartridges can be fitted having a separate case for each type of cartridge. Brown plastic with a red plastic handle. Silver embossed cover plate on top, and comes two two cartridge mounting screws. Pins and cartridge clips silver plated. Two leads are soldered to the cartridge, the other two leads are present with the orig Garrard clips Headshell in New condition: Plastic is clean and glossy. No chips cracks or other problems. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Record Player valise portable années 60, type SRP 51, Made by Garrard for Bush , hauteur 22 cm, longueur 44 cm, largeur 47 cm, poids seul 11,8 kgs, Serial N° 947/00373 , Product of the Rank Organisation . Bon état de fonctionnement. Envoi avec assuranceEnvoi international à négocier avec lacheteur

Garrard Pickup Stylus Pressure Gauge Type SPG3 Boxed Range 0/12 grams.

Garrard Pickup Stylus Pressure Gauge Type SPG3 Boxed Range 0/12 grams in 1/2 gram divisions. Excellent condition

Garrard Pickup Stylus Pressure Gauge Type SPG3 Boxed Range 0/12 grams, complete!. Great condition and even has its original instructions and Test weight!!Any questions please ask

Garrard Pickup Stylus Pressure Gauge Type SPG3 Boxed Range 0/12 grams.

Garrard Pickup Stylus Pressure Gauge Type SPG3 Boxed Range 0/12 grams in 1/2 gram divisions. Excellent condition

Record Player valise portable années 60, type SRP 51, Made by Garrard for Bush , hauteur 22 cm, longueur 44 cm, largeur 47 cm, poids seul 11,8 kgs, Serial N° 947/00373 , Product of the Rank Organisation . Bon état de fonctionnement. Envoi avec assuranceEnvoi international à négocier avec lacheteur

Garrard Pickup Stylus Pressure Gauge Type SPG3 Boxed Range 0/12 grams.

Garrard Pickup Stylus Pressure Gauge Type SPG3 Boxed Range 0/12 grams in 1/2 gram divisions. Excellent condition

Garrard Pickup Stylus Pressure Gauge Type SPG3 Boxed Range 0/12 grams.

Rare Garrard 4HF(L) turntable in good condition. The idler wheel is soft and runs quiet.. The motor runs very quiet. It´s a 110v version. I use a step down transformer and the speeds are correct. We have 50HZ in Europe. I do not know the pulley is a 50 HZ or 60 HZ version. The rare biscuit tin plinth has som marks. Also the turntable has some marks and scratches. The linkages have some rust spots. Tonearm need rewire. It comes with another headshell. No more further test. Sell as is for parts and repair. Due to the age, no warranty implied. Shipping cost: USA: $125.00China, Japan, rest of the world: $125.00Europe, EU:$65.00On May-21-23 at 11:36:53 PDT, seller added the following information: The speed control has been changed to a CLAROSTAT 2500 OHM 25 WATT RHEOSTAT

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am selling parts from a Garrard Type A & RC88 turntable. Pls check the link below for more parts. If you need a part from the mechanism or dont see the part listed, shoot me a message. Click here for more Garrard Turntables and Parts GARRARD PLATTER for Turntables GARRARD RC 88 98 120 121This is the brown painted platter used as a turntable, it will also fit as subplatter on the Garrard A70 Type A, This platter is painted brown and comes from an early RC88/4 turntable. Tested, runs absolutely true. Diameter 9 1/8, height 7/8, weight about 1 1/2 lbsCONDITION Item is in close to new condition, undamaged and paint perfect, only a few faint scuffs inside the raised hub. . Pls check my other listings for more Turntable and Phonograph items. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution