Garrard Pickup Stylus Pressure Gauge Type SPG3 Boxed Range 0/12 grams.

Garrard Pickup Stylus Pressure Gauge Type SPG3 Boxed Range 0/12 grams in 1/2 gram divisions. Excellent condition

Garrard Pickup Stylus Pressure Gauge Type SPG3 Boxed Range 0/12 grams.

Rare Garrard 4HF(L) turntable in good condition. The idler wheel is soft and runs quiet.. The motor runs very quiet. It´s a 110v version. I use a step down transformer and the speeds are correct. We have 50HZ in Europe. I do not know the pulley is a 50 HZ or 60 HZ version. The rare biscuit tin plinth has som marks. Also the turntable has some marks and scratches. The linkages have some rust spots. Tonearm need rewire. It comes with another headshell. No more further test. Sell as is for parts and repair. Due to the age, no warranty implied. Shipping cost: USA: $125.00China, Japan, rest of the world: $125.00Europe, EU:$65.00On May-21-23 at 11:36:53 PDT, seller added the following information: The speed control has been changed to a CLAROSTAT 2500 OHM 25 WATT RHEOSTAT

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am selling parts from a Garrard Type A & RC88 turntable. Pls check the link below for more parts. If you need a part from the mechanism or dont see the part listed, shoot me a message. Click here for more Garrard Turntables and Parts GARRARD PLATTER for Turntables GARRARD RC 88 98 120 121This is the brown painted platter used as a turntable, it will also fit as subplatter on the Garrard A70 Type A, This platter is painted brown and comes from an early RC88/4 turntable. Tested, runs absolutely true. Diameter 9 1/8, height 7/8, weight about 1 1/2 lbsCONDITION Item is in close to new condition, undamaged and paint perfect, only a few faint scuffs inside the raised hub. . Pls check my other listings for more Turntable and Phonograph items. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am selling parts from Garrard Type A turntable. Pls check the link below for more parts. If you need a part from the mechanism or dont see the part listed, shoot me a message. Click here for more Garrard Turntables and Parts This idler wheel for REPAIR/ RE-TYRING: shiny and flexible rubber, but rim has several flat spots, where the turntable was left in On position for a long time, Runs noisy and bumpy Comes from a Type A, used in most RC models from RC88 98 120 Type A to LAB 80Metal plating is shiny, bushing is tight and runs freely. Idler drive wheel for Garrard record changers. Replacement Comments:Replaces Garrard part 53883 used in Type A, Type A Mk II, A70, A70 Mk II, Lab80, Lab80 Mk II, RC88, RC88 Mk II, RC88/3, RC88/4, RC98, RC98/3, RC98/4, RC120, RC121, RC121/3, RC121/4, RC121/11, RC210, T11, TA Mk11, 4SP.Specifications:OD (inches): 2.250ID (inches): 0.170Height (inches): 0.550Thickness (inches): 0.105 I am selling parts from Garrard Type A turntable. Pls check the link below for more parts. If you need a part from the mechanism or dont see the part listed, shoot me a message. Click here for more Garrard Turntables and Parts All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Turntables, Catalogs, Phonograph Items, books and records! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. This GARRARD TONE ARM 1x HORIZONTAL PIVOT SCREW comes from a Type A Transcription turntable. Also used on the Type A 4HF Turntable and TPA12 Tonearm FIRST PICTURE FOR ILLUSTRATION ONLY, TONEARM NOT INCLUDED.Up to 2 screws available, contact me for combined shipping*** I am parting out a Garrad Type A turntable, pls let me know if you need other parts *** Click here for more Garrard Turntables and Parts Specifications Plated Steel, slotted head .325 diameter, threaded shaft .175 diameter, smooth shaft .075 diameterCondition: close to newPls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping. We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. This is an important part of the Main Turntable bearing This part is used in most Garrard turntables from 1950- 1960, Lab 80 & Mk II Type A A70 RC 88 98 121 210 This is the washer that sits loosely on the main platter shaft. It is the upper race of the main thrust bearing. Often it gets lost, when the bearing is disassembled. Without this washer, the turntable will not ride on the bearing balls but slide metal on metal. The actual washer is shown in pictures 2 and 3. For illustration I am showing the main shaft and the bearing assembly. THIS SALE IS FOR THE WASHER ONLY Hardened Steel Outer Diameter 5/8 inner diameter about 3/8 CONDITION: very clean, tested runs great. no wear or grooves on the washer I am selling parts from a Garrard Lab 80 turntable. Pls check the link below for more Lab 80 parts. If you need a part from the mechanism or dont see the part listed, shoot me a message. Click here for more Garrard Turntables and Parts Item will be carefully boxed for safe shipping. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Turntables, Catalogs, Phonograph Items, books and records! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am selling parts from a Garrard Lab TYPE A turntable. Pls check the link below for more Lab 80 parts. If you need a part from the mechanism or dont see the part listed, shoot me a message. Click here for more Garrard Turntables and Parts FROM A Garrard TYPE A turntable.This is the main conical TURNTABLE SHAFT on which the MAIN PLATTER sits. This is the standard version used on most turntables from the 1950s, e.g. TYPE A RC88 RC120 RC98 basically anything after RC80 and before LAB 80This is a main part of the platter bearing. Pls note that for proper function you will also need the upper bearing race washer, which fits at the bottom of the shaft. Without this, the turntable will not run on the bearing balls. Pls check my other listings CONDITION: Close to new condition, very clean, tested runs great. Light scuffing of the outer surface The inner bronze bearings are in perfect shape, smooth without scratches. Item will be carefully boxed for safe shipping. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Turntables, Catalogs, Phonograph Items, books and records! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. This is an important part of the Main Turntable bearing, comes from a Garrard Lab 80: LOWER MAIN BEARING WASHER with rubber Insulation ringThis part is used in most Garrard turntables from 1950- 1960, Lab 80 & Mk II Type A A70 RC 88 98 121 210 This is the washer that sits below the penolic ring and the 5 bearing balls. It is the part that transmits the weight of the turntable to the chassis. It is the lower race of the main thrust bearing. The rubber rings prevents turntable rumble to be transmitted to the main chassis and the tonearm. Pls note that the upper race and the lower race are not identical, the upper race has a wider inner diameter The actual washer and rubber ring is shown in pictures 2 and 3. For illustration I am showing the main shaft and the bearing assembly. THIS SALE IS FOR THE WASHER and RUBBER RING ONLY Hardened Steel Outer Diameter 5/8 inner diameter about 7/16 CONDITION: very clean, tested runs great. no wear or grooves on the washer. Rubber ring very flexible and undamaged. I am selling parts from a Garrard Lab 80 turntable. Pls check the link below for more Lab 80 parts. If you need a part from the mechanism or dont see the part listed, shoot me a message. Click here for more Garrard Turntables and Parts Item will be carefully boxed for safe shipping. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Turntables, Catalogs, Phonograph Items, books and records! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am parting out a Garrad RC88 turntable, pls let me know if you need other parts ***Click here for more Garrard Turntables and PartsThis GARRARD Speed SELECTOR LEVER KNOB is from a TYPE A turntable. (THE COVER IS FOR ILLUSTRATION ONLY - NOT INCLUDED) Will fit also Garrard turntables RC209 and 210Sits on top of the Speed Selector lever of the turntableMolded tan plastic, polished aluminum scale, size 3/4 x 3/8, 3/8 highThe knob is just pressed onto the end of the L-shaped speed leverlCONDITIONClose to new condition, no chips cracks or scratches Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping. We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. This is the main conical TURNTABLE SHAFT on which the MAIN PLATTER sits. It is shown in pictures 1 - 5 This shaft is used in most Garrard turntables from 1950- 1960, Type A A70 RC 88 98 121 210 This is a main part of the platter bearing. Pls note that for proper function you will also need the upper bearing race washer, which fits at the bottom of the shart. Without this, the turntable will not run on the bearing balls. Pls check my other listings FOR ILLUSTRATION I AM SHOWING THE COMPLETE Thrust Bearing assembly in the last picture. The Additional parts are NOT INCLUDED CONDITION: very clean, tested runs great. The inner bronze bearings are in perfect shape, smooth without scratches. I am selling parts from a Garrard Lab 80 turntable. Pls check the link below for more Lab 80 parts. If you need a part from the mechanism or dont see the part listed, shoot me a message. Click here for more Garrard Turntables and Parts Item will be carefully boxed for safe shipping. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Turntables, Catalogs, Phonograph Items, books and records! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. Click here for more Garrard Turntables and PartsFOR SALE are 2x GARRARD Cartridge mounting screws 1/4. Check my other listings for the longer Garrard 1/2 screws used on later headshellsCartridges and Headshells shown are for ILLUSTRATION ONLY 2 x Cartridge mounting screws from a Garrard Turntable threaded shaft .25, overall length .28 These screws are used on the brown bakelite headshells with the brass distance posts of the RC series (MPM2 and MPM3) and the ivory colored headshells (MPM4 and MPM5) These are long enough to securely mount a GE VR or VRII, and other cartridges with a thin mounting plate. Threaded part is the uncommon British 6BA thread. This thread was used in all 1950 and early 1960 turntables, I have verified the following for perfect fit: 4HF RC88 RC98 RC120 121 209 201, Type A Lab 80 A70, this includes the XX/4 and MKII variants. May fit on later turntables. Also used in all Garrard brown bakelite and ivory headshells of the 1950s eg, 4HF TYPE A Turntable and TPA10 TPA12 TONEARMs 2x Brand New Slotted Brass screws Condition: Perfect working condition with tight, secure fit. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day.FIRST PICTURE FOR ILLUSTRATION ONLY.This GARRARD PLATTER RETAINING CLIP Turntable Circlip Part 53176 comes from a A70 Transcription turntable.Part is used on all turntables from the 1950s and early 1960s, RC88 98 120 121 210 and Type A A70 and their MKII versions.The clip is put in a groove on top of the main spindle and holds down the (sub)platter. When it is missing, the bearing balls may fall out of the main platter bearing on some turntables.*** I have parts available for Garrad Lab 80 A70 Type A RC88/98 ype A turntable, pls let me know if you need other parts ***Click here for more Garrard Turntables and PartsBlackened Steel Circlip with domed washer and rubber ring. Inner Diameter about 9/16CLOSE TO NEW CONDITION, no scratches or marksPls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am parting out a Garrad Type A turntable, pls let me know if you need other parts ***Click here for more Garrard Turntables and PartsThis GARRARD Type A AUTOMATIC On REJECT/ Off THIS IS THE RIGHT SIDE ONE of the two levers. They are different. This one has a small groove at the bottom where the screwed collar fits Will fit also Garrard turntables RC209 and 210Molded tan plastic knob on metal lever and round shaftCONDITIONClose to new condition, plastic knob in great shape, metal shiny and uncorroded, Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am parting out a Garrad Type A turntable, pls let me know if you need other parts ***Click here for more Garrard Turntables and PartsThis GARRARD Type A MANUAL ON/ OFF lever. THIS IS THE LEFT ONE of the two levers. They are different. This one has a small C clip at the bottom Will fit also Garrard turntables RC209 and 210Molded tan plastic knob on metal lever and round shaftCONDITIONClose to new condition, plastic knob in great shape, metal shiny and uncorroded, comes with original C Clip Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. *** I am parting out a Garrad TYPE A turntable, pls let me know if you need other parts ***Click here for more Garrard Turntables and PartsGARRARD TYPE A 1x CHASSIS SUSPENSION SPRING (Up to 4 available) Lower part spring and flat spring steel clips into mounting board or plinth, upper, spring supports chassis. Steel screw with paper washer Total length about 1.5, length above mounting board .75, below mounting board .75Per Garrard Mounting instructions: Diameter hole required: 3/4, maximal thickness of mounting board: 1/2Contains: Lower spring with screw shaft, upper spring and washer. Very clean condition, screw shiny, springs are strong and undamaged. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. FIRST PICTURE FOR ILLUSTRATION ONLY, Screw and TONEARM NOT INCLUDED.This tiny 4mm coil spring and 1/16 bearing ball sit inside the tonearm bushing facing inwards, when the tonearm is removed, these parts usually just fly away.The spring provides the necessary tension to the tonearm bearing, so that the bearing is tight. Without the spring, the tonearm bearing will be sloppy, which affects the sound reproduction.These parts come from a GARRARD Type A Transcription turntable. Also used on the Type A 4HF Turntable and TPA12 Tonearm Click here for more Garrard Turntables and Parts Condition: close to newPls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am parting out a Garrad RC88 turntable, pls let me know if you need other parts ***Click here for more Garrard Turntables and PartsThis GARRARD Speed SELECTOR Trim is from a TYPE A turntable. Will fit also Garrard turntables RC209 and 210Covers the Speed Selector lever of the turntableMolded tan plastic, polished aluminum scale, size 2 1/4 x 7/8Garrard mounted these by twisting the little tabs of the cover plate. Those tabs break off when removing the cover.Tabs are still about 2mm long and will seat cover securely on the chassis. A drop of contact cement or superglue will hold it in place.Otherwise:Close to new condition,aluminum scale in perfect shape. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am parting out a Garrad RC88 turntable, pls let me know if you need other parts ***Click here for more Garrard Turntables and PartsThis GARRARD ON/ OFF/ AUTOMATIC REJECT SELECTOR Trim is from a TYPE A turntable. Will fit also Garrard turntables RC209 and 210Covers the Manual Off On and Automatic Off - On Reject levers of the turntableMolded tan plastic, raised black Garrard logo and polished aluminum, size 3 x 1 1/2Garrard mounted these by twisting the little tabs of the cover plate. Those tabs break off when removing the cover.Tabs are still about 2mm long and will seat cover securely on the chassis. A drop of contact cement or superglue will hold it in place.Otherwise:Close to new condition,aluminum and Garrard logo in perfect shape. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Garrard Idler wheel, to suit early models (not autoslim), inc LAB 80, RC121, 210 etc. In good order, rubber in flexible condition and very useable. Pictures part of the description, 2.1/4in diameter approx. Used, No warranty or return Last one.

C-3 TYPE CARTRIDGE MOUNTAFTERMARKET MOUNT--NOT ORIGINALWITH SOME HAND MADE IMPROVEMENTS READ DESCRIPTION BELOWROUND COPPER SLIDE CONTACTS HAVE BETTER ENGAGEMENT WITH THE HEAD SHELL CONTACTSSTANDARD CARTRIDGE MOUNTING SLOTS HASREDUCED MASS--NO HEAVY ZINC IN CENTER THE FRONT OF C-3 HAS A WHITE MARK. MOVE THE AUTO / MANUAL LEVER TO THAT SIDE FOR THE PLAY OF A SINGLE RECORD--OTHER WAY FOR MULTI PLAY. WIRES HAVE GOLD PLATED CARTRIDGE CONNECTORS & UNLIKE THE ORIGINAL-- VERY FIRMLY ATTACHED DESIGNED FOR & TESTED ON THE MODELS--ZERO 100, ZERO 100-C IMPORTANT--NOT FOR THE ZERO 92 OR ANY OTHER MODEL NOT LISTED ABOVE. DAMAGE TO UNIT MAY OCCUR !!SOME UNITS HAVE SHORT FLAT CONTACTS THAT NEED THE FLAT C-3 CONTACTS--OURS ARE ROUND. YOU WILL / MUST BE HAPPY OR RETURN IN 30 DAYS FOR REFUND. WE PAY RETURN SHIPPING. Please e-mail any questions See our other auctions for vintage audio and hard to find turntable/speaker parts. Thanks again for looking and happy bidding! BID WITH CONFIDENCE Check our feedback We know how to pack & ship 37 years repairing/restoring turntables Track Page Views With Auctivas FREE Counter

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. This GARRARD TONE ARM WAND comes from a Type A Transcription turntable. it is similar in measurements and design (especially the wand to TPA12 Tonearm *** I am parting out a Garrad Type A turntable, pls let me know if you need other parts *** Click here for more Garrard Turntables and Parts Specifications Effective length: 9-4/16 (235mm) Mounting distance: 8-11/16 (220.7mm) Overhang: 9/16 (14.3mm) Mounting hole diameter: 7/8 (22.2mm) Complete wand, headshell connector and lever. Includes tension spring and 12 complete tonearm leads CONDITION: White enamel paint close to perfect, the red lettering for tracking weight is a perfect, Aluminum nice wtih slight foxing/ tarnish on top. Driver ID number has been engraved on the outside of tonearm (a typical anti-theft measure in the 1960s) Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Garrard Pickup Stylus Pressure Gauge Type SPG3 Boxed Range 0/12 grams.